20 Most Recent General Electric Adora GHDA670N Built-in Dishwasher - Page 8 Questions & Answers


Hello Debbe,

Does the dishwasher fill with water, or is full and fails to drain?
Can you provide additional detail so that we may accurately troubleshoot? Also include the complete model number. It should be etched or stamped on a plate inside the door, or elsewhere on the washer.

Thank you!

GE Dishwashers | Answered on Feb 11, 2018


How many cycles have you attempted? It may take a few cycles before the detergent pack becomes soft enough to run out and allow the latch to function properly.
Otherwise, if you can reply back with additional information such as model number, someone here on Fixya will be able to provide assistance.

Best regards,


helpful-rmh1nkwavuqlpyc44d3sgb0s-3-0_3.png

GE Dishwashers | Answered on Feb 11, 2018


Check the door seal carefully for accumulated food debris or grease build up. If its a built in model with a wooden door panel, make sure the door gasket closes fully before the wooden panel makes contact with the cabinet - sometimes poor adjustment here prevent s the door gasket from closing fully. Water or rinse aid leaks from the machine must be treated seriously and mended, as they pose a significant fire risk. Rinse aid tends to dissolve electrical wiring insulation!
You may need to adjust the door catch on integrated machines to ensure the door closes correctly.

GE Dishwashers | Answered on Feb 04, 2018


The problem is insufficient water.
There are a few issues that cause this, and most are pretty easy to fix. Check this site for instructions and pictures:


Dishwasher Repair Tips Dishwasher Not Cleaning Dishes

GE Dishwashers | Answered on Jan 31, 2018


I know nothing of dishwashers but such check valves are usually included to prevent syphon-back when there is no air-break in the discharge.
Personally I prefer a high discharge with an air-break but many prefer a permanently fixed discharge which is usually low and in some conditions syphon-back can happen. In this case a check valve is advisable even if local building regulations don't require it.

GE Dishwashers | Answered on Jan 31, 2018


Could be a defective cycle timer

GE Dishwashers | Answered on Jan 30, 2018


Check drain pump spins freely by hand, then check for voltage to pump. If voltage present then most likely drain pump faulty.If no voltage present then most likely relay fault on pcb

GE Dishwashers | Answered on Jan 18, 2018


A picture would help, as there are plenty of parts tona machine

GE Dishwashers | Answered on Jan 17, 2018

Not finding what you are looking for?
General Electric Adora GHDA670N Built-in Dishwasher Logo

71 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4369 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Dishwashers

  • GE Dishwashers

Most Popular Question

ge quiet power 3 dishwasher

  • Dishwashers
Loading...