20 Most Recent General Electric Adora GHDA670N Built-in Dishwasher - Page 4 Questions & Answers


Check the stainless steel cover on the bottom of the lower rack sprayer. If it has been bent downward on either end, it will hit the inside panel of the door near the bottom. It may score the panel as it hits on each rotation of the sprayer.

Just bend it back in position, carefully, with a pair of pliers. The technique required is similar to bending the pocket clip of a fountain pen back into the proper position after it has been sprung out too far. You might practice on a pen or mechanical pencil clip to see what I mean.

GE Dishwashers | Answered on May 30, 2019


ASK Google WHAT IT MEANS THEN PROCEED WITH FIXING IT . THO SELF REPAIRS USUALLY END UP COSTING MORE THAN CALLING A PROFESSIONAL REPAIR SERVICE

GE Dishwashers | Answered on Apr 19, 2019


The main pump motor may not be working. If you cant hear it running, it may be jammed up or burnt out. If you can hear a loud humming noise, its possible its only jammed. You will have to remove the pump and see if any foreign matter has stuck in the pump impellor. If the pump is running, check the small outlet holes in the spray arms, they may be blocked.

GE Dishwashers | Answered on Apr 10, 2019


Bad timer. Sadly, the cost of replacing the time and the solenoid is likely prohibitive. Timer is expensive. Sorry, I know this is not what you want to hear.

GE Dishwashers | Answered on Mar 31, 2019


Control board defective or washer pump.

GE Dishwashers | Answered on Mar 28, 2019


possible resrtriction, weak water pump!

GE Dishwashers | Answered on Mar 14, 2019


SADLY SINCE I HAVE NEVER SEEN IT I CAN NOT GUESS .POSSIBLY PLUGGED WITH SOMETHING

GE Dishwashers | Answered on Mar 13, 2019


If not an open fuse or breaker, check for a faulty cycle timer.

GE Dishwashers | Answered on Jan 30, 2019


Can only try, take look at this video may help you.
All best Clive
Just click on Link
https://www.youtube.com/watch?v=gVgpxv6pCP4

GE Dishwashers | Answered on Jan 20, 2019


It is normal for there to water above the sump area on that model
dishwasher. How this unit works is...the timer send voltage to the drain
solenoid for a short period of time, then disconnects the power. The water
pressure that is created by the pump is what **keeps** the drain valve open,
until the water pressure/volume is low enough for the drain valve spring to
overcome and the valve closes. I assume that you have cleaned the air gap
out?

GE Dishwashers | Answered on Jan 12, 2019

Not finding what you are looking for?
General Electric Adora GHDA670N Built-in Dishwasher Logo

71 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4369 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Dishwashers

  • GE Dishwashers

Most Popular Question

ge quiet power 3 dishwasher

  • Dishwashers
Loading...