20 Most Recent Crosley CW5000 Front Load Washer - Page 7 Questions & Answers

check pump for blockage,s

check motor capacitor

Check filter screens at solenoid,back of machine,,check solenoid itself.

it might not be connected completely or it has a hole in the bottom of the washing tub.

motor control board

water valve stuck open

check bearings or counter weights

check belt/s

whats the question

bang hard near catch might release it..... cheers

Thank you for your post, derek dion! From the information you have provided you need to know how to access the drain pump on your Crosley washer. I was unable to locate a step by step instruction sheet on how to access the drain pump. From your parts manual you would need to remove the front panel and it is located directly under the drum. If you are having trouble locating it or removing the front panel I would recommend contacting a professional technician for proper disassembly and repair. Best of luck! -OOS

might be something stuck in the drain pump

A fill valve will have a connection to the water supply and a tube or hose going to the point of discharge. It will also have a two-prong electrical connector on it at the top of the solenoid coil housing.

No button. Unplug from outlet for at least 10 minutes, then plug back in.

The machine thinks the door isn't closed. Could be due to a faulty door switch or control board.

You could try a reset by unplugging the cord, wait 10 minutes or more, then plug it back in and press the Start/Cancel button. Otherwise, if a chinese control board is bad, you'll need a technician.