20 Most Recent
Westell Wirespeed LiteLine 6110 Modem - Page 3 Questions & Answers
I'm trying too install the
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.
8/26/2010 6:25:16 PM •
Westell...
•
Answered
on Aug 26, 2010
How can I configure Dynamic
First connect your router to computer with ethernet lan cable.
Then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1
If you are not able to access it with above ip then check your computers ip and gateway ip is your router ip access router with it.
Then it ask for user and password.
Type user as "admin" and password as "admin" orblank or "password"
Then you can see configuration page of router.
Then configure DNS settings in wan settings as dns ip get automatic from internet service provider.
Then save settings and restart router.
Let me know if you need further assistance.
Thanks for using FixYa.
8/13/2010 8:12:25 PM •
Westell...
•
Answered
on Aug 13, 2010
Linksys router and Westell modem are not talking
Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for more information about the routers and network
3/14/2010 6:20:54 PM •
Westell...
•
Answered
on Mar 14, 2010
I got it thru Verizon (Westell Model num.
You are trying to open the NAT on the router for X-box.
For this you will need to reduce the MTU settings on the router to 1365.
You will also need to trigger some ports on the router.
For this you will need to open the router set up page.Router set up page is the page where you can change the settings of the router
Click Here to know more about router and network
1/16/2010 1:50:19 AM •
Westell...
•
Answered
on Jan 16, 2010
How do u raise the mtu
using your computer connected to the router log onto the router configuration page and change it in the settings. to access most routers you need the ip typed in the address bar of your internet browser, usually something like " 192.168.1.1 " you will then most likely need a username and password to log on. The default username can be found in your hardwares manual or website
1/7/2010 11:02:46 PM •
Westell...
•
Answered
on Jan 07, 2010
I can't connect to my
Make sure your broad band cable connected properly to modem and cable is work fine.
Reset your modem to factory defaults.
Press RESET button it is in back side of modem.Hold that RESEt button for 10 seconds then check.
There should be issue with your broad band cable .Remove that cable jack and try with new jack.
Let me know if you need further assistance.
Thanks for using FixYa.
12/7/2009 4:59:06 PM •
Westell...
•
Answered
on Dec 07, 2009
It says I'm connected but
Click on start and then "run" and type in cmd.exe
When the window comes up, type in ping
www.verizon.net
If you are connected to the internet, you will see a reply from that website (4) times. If you are not connected to the internet, it will say no repsonse.
Go to accessories, then communications, and click on new connection wizard. That may get the internet pages working
9/24/2009 5:26:46 AM •
Westell...
•
Answered
on Sep 24, 2009
CANT GO ON MY IPOD USING MY ROUTER
Have you configured the WESTELL router to set a "SSID", and to "enable" its wireless services?
It should not matter which ISP (COMCAST, QWEST, ROADRUNNER) that you are using -- it's strictly a problem between your iPod and your router.
9/17/2009 8:25:15 PM •
Westell...
•
Answered
on Sep 17, 2009
Westell modem is acting as router, but i need
The quickest and most painless way to do this is to call Verizon or whoever supplied the DSL modem and have them talk you through it. You need your account info and master password...or they can reset it if you know enough info about the account name. Then, they will turn it into a bridge for you
Carl
7/14/2009 6:52:37 AM •
Westell...
•
Answered
on Jul 14, 2009
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Solitaire master has a hang
clarify pi please. if you meant pi to mean main screen picture, you probably have used up your free time on this program.
Not finding what you are looking for?