20 Most Recent Westell Wirespeed LiteLine 6110 Modem Questions & Answers


I would reset the router and start over. hold the reset button on the router for 10 seconds to restore factory defaults.

Westell... | Answered on Feb 17, 2018


I would check your DSL device first. Routers just send the signal out. The DSL device is what really controls everything you receive or send out.

Westell... | Answered on Nov 30, 2017


Hi,
You can connect with the PS3 2 ways >>>>>>

1, wireless, make sure that you have an internet connection first with a computer and that you know your network name and password (if you have one set up).
Go into the PS3 menu and scroll to the network config section, and set up a new network, where it says SSID this is the name of your network, for example SKY1234.
Then it will ask you for a encryption type, for example WPA or WEP and then your password, input your password and let the PS3 do the rest, if there is anything wrong it will tell you.

2, wired through an ethernet cable, again go to the network config section in the PS3's menu and set a wired connection, it will not ask you for your SSID or password as its a wired connection.

If you need anymore help or advice please feel free to post back.


Good luck.

Westell... | Answered on May 30, 2012


1. power cycle the router
2.
1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser window that is ( internet Explorer or Firefox)
2. Verify wireless router name( on the computer) >>> ( on/off) ( router status window)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model router

Westell... | Answered on Oct 11, 2010


go to IE.
type 192.168.1.254
go to Advance
go to PPP Location
Select bridge mode.

Westell... | Answered on May 03, 2010


You can actually use your PS3 via direct connection through ethernet connection for internet access. Just make sure to go to the configuration screen of your PS3 for automatic connection and refer to manual or call Sony for additional tech support

Westell... | Answered on Apr 26, 2010


The Valet Plus manual shows rear connections for 4 wired computers (like most routers), so you would plug your work computer into one of those. The yellow Internet port on the back of the Valet would connect to the modem's Ethernet jack (also yellow, I believe; that's the standard color coding). If you need full setup information you can download the manual and get other answers at Cisco's site.

Westell... | Answered on Apr 11, 2010


try to do the ff:
power cycle modem/router
check router security settings
check for wifi barriers
delete previous wireless connections
optimize ie
If your wireless connection is working fine 2 wks ago then you may also try to run system restore

Westell... | Answered on Mar 28, 2010


Is the issue resolved?

Westell... | Answered on Feb 26, 2010


Hi There.. Please follow te below steps..

1) Connect your old computer to the wireless network. Nowadays most people use the internet through a wireless network. So basically, if you have wireless internet and you are able to get on the internet... that means you are connected.

2) Go into the networks settings. This is usually as simple as right clicking the network's icon and then clicking properties. What you want to do is turn on, "file and printer sharing" within the network

3) Now, go to the folders/data that you want to transfer. Right click or get into the properties of that folder. Check the box that says "share this folder with network".

4) On the new computer, connect to the wireless network. Under control panel or possibly the start menu, there should be an option for "My Network Places" or "My Network". In this folder you should find the data that you chose to share from your old computer. You can simply copy/paste or drag/drop the files to your new computer.

Now you are offset to transfer the files from one laptop to another...
Was this information is helpful. Kindly revert if this helpful..

Westell... | Answered on Jan 12, 2010


there might be a problem with the Linksys router, the Westell 6100 should be 1st set to bridge mode in order for your router to be connected to it. or there could also be a proble on the Verizon server.

Westell... | Answered on Dec 05, 2009


Either you get a router to allow your pc and xbox to get online at the same time.
OR,
You may contact your Internet Service Provider and ask them if they can replace your Westell Wirespeed with a Westell Versalink (modem/router-in-one). Mostly, ISPs will inform you if it is cheaper to buy a router from them or replace the modem.

Westell... | Answered on Dec 04, 2009


Try first disconnecting modem from power and restarting the computer.

Disconnect modem.
Turn off computer.
Restart modem first.
Restart computer.

Disable firewall.

If you have a different cable to connect to modem, test the other cable.


If that does not help, second step is calling the internet provider to find out if there is a problem on their side.

When you call the provider, ask also to verify modem authentication settings (broadband access).

If still no luck, then either the modem started to malfunction, or the system on computer has a problem.

Try doing a system restore to a date before the problem started.

If it still does not work , then the modem may be faulty. Replace it, possibly with a router.

Regards.

Westell... | Answered on Nov 15, 2009


No you cant.. But good router I preffer Linksys wrt54G2. Should just be able to plug ethernet from modem to WAN on wrt54g2.

Westell... | Answered on Sep 16, 2009


Yes, but if you want to connect the X-box and computer directly you may need to get a crossover cable. Sorry, I can't say for sure on this as it depends on the network card in the PC.

You should have a box in the configuration dialog for the Cricket saying something like "Allow other network users to connect through this computers internet connection". Be sure this box is checked.

Westell... | Answered on Aug 28, 2009


go here, www.portforward.com you can find how to setup your xbox here.

Westell... | Answered on May 21, 2009


- If you want to connect 2PC's to your Westell, make sure your Westell router has 1 or more Ethernet ports on it for you to connect your 2PC'sto the Internet simultaneously, if hasn't you may need a desktop switch for it.

Westell... | Answered on Mar 14, 2009

Not finding what you are looking for?
Westell Wirespeed LiteLine 6110 Modem Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Westell Wirespeed Computers & Internet Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you a Westell Wirespeed Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Westell Wirespeed Computers & Internet

  • Westell Wirespeed Computers & Internet

Most Popular Question

file transfers from one wireless

  • Computers & Internet
Loading...