Bunn BT10B Coffee Maker - Answered Questions & Fixed issues

0helpful
2answers

Lid on carafe

Sadly, I have about 10 people who have this coffee maker. It is a wonderful little coffee maker and is very delicate.

the worst problem all the people here say is the lid leaks like a waterfall or it leaks by dripping non stop while pouring.

I had to call Bunn, who made this machine, and they have yet to figure out a solution to this problem other than having people who own this machine buy a whole new carafe with new seals.

You might try your local applianace repair store. Sometimes their engineers are smart guys who knows exactly what seals will work or where to get the parts you need better than the actual manufacter.
11/13/2015 3:00:27 AM • Bunn BT10B... • Answered on Nov 13, 2015 • 305 views
0helpful
2answers

BUNN BT10B carafe leaks from spout down side while pouring

I emailed the company again and they are replacing the thermal carafe at no charge. Thanks!
11/13/2015 2:57:34 AM • Bunn BT10B... • Answered on Nov 13, 2015 • 1,563 views
0helpful
1answer

How do you replace a thermal fuse

If the fuse inline in the wire(s) to the heating element, simply cut off the old fuse, strip back the wires a little and insert a new thermal fuse using either but crimp terminals or screw terminal strips.
11/25/2014 9:45:49 PM • Bunn BT10B... • Answered on Nov 25, 2014 • 664 views
0helpful
1answer

My basket always overflows, the water doesn,t empty fast enough

Here is the SOLUTION(S):1. Buy a sprayhead that restricts the flow2. Let the water flow through for a few minutes, then lift the lid while it flows through.3. Don't use Decaf4. Plug up a couple holes on your current spray head
12/14/2012 1:23:14 PM • Bunn BT10B... • Answered on Dec 14, 2012 • 499 views
0helpful
1answer

How do i fix my bunn coffee pot, it's leaking

Probably need the gasket Bunn can send you. There is a second one that also tgey can't send that goes in the top of tge canister. alltempparts.com/gasket-tank-lid1.html
10/31/2012 1:50:36 PM • Bunn BT10B... • Answered on Oct 31, 2012 • 366 views
0helpful
2answers

Bunn BT10-B silicone washer

Yes, you can get a washer from your local Bunn repair shop. For a list of repair facilities in your area, go to www.bunn.com And yes, the heat is a problem, so you can't use just any washer.
10/31/2012 1:47:21 PM • Bunn BT10B... • Answered on Oct 31, 2012 • 1,079 views
0helpful
1answer

How do I empty and clean the water storage tank?

I dismantled it and scraped out the buildup your ring that seals the canister will be useless. Let me find the link to the company that sold me a replacement. Bunn will not sell you this as it breaks their UL listing to replace it yourself.
10/31/2012 1:43:36 PM • Bunn BT10B... • Answered on Oct 31, 2012 • 67 views
0helpful
2answers

I have lost the manual

Go to Bunn's site - here is the link for the manual:
http://bunnomatic.com/pdfs/commercial/manuals/37688.0001.pdf


8/21/2012 12:31:30 PM • Bunn BT10B... • Answered on Aug 21, 2012 • 346 views
0helpful
1answer

Water leaks

You don't state where water leaks from, 2 solutions, tighten up connectors, or fit new " O " Rings to the connector pipes.
7/23/2012 1:41:10 PM • Bunn BT10B... • Answered on Jul 23, 2012 • 30 views
0helpful
1answer

Bunn-o-matio model btx-b does not heat water

Hi, Sounds like a boiler therostat or faulty boiler. Dazza REPAIRER
9/24/2011 2:35:51 AM • Bunn BT10B... • Answered on Sep 24, 2011 • 547 views
0helpful
1answer

Water resevoir around washer has

go to bunns website and look for the bunnserve center for where you live they can order you one
9/20/2011 3:57:05 PM • Bunn BT10B... • Answered on Sep 20, 2011 • 53 views
0helpful
2answers

My Bunn BX-B just stopped

Hello,

The problem of the coffee maker is simply from the thermostat regulator. It is bad and need to be replaced. To fix this is quite expensive, and will require a professional touch from an expert that will be able to carefully disassemble am reassemble the components for you as the parts are quite sensitive to deal with.

There is no reset switch for this coffee maker, you just have to replace the thermostat before it can start working fine once again.

Hope this was helpful.
Goodluck
Elect_Comp
6/29/2011 6:11:14 PM • Bunn BT10B... • Answered on Jun 29, 2011 • 1,735 views
0helpful
1answer

If Bunn unit has been stored for a while, how do i

Hi, W/D here.
To get your Bunn working again, place a filter into the basket, fill the reservoir, and allow it to begin dispensing into the carafe. This will take several pots of water to get it filled and overflowing (dispensing). Plug it in, and let the reservoir heat up. It's not necessary at this point to have the heating plate turned on, but you can do so if desired to check that it is working, then turn it back off. Once you hear the reservoir heating up, pour in 8 ounces of white vinegar, and let the machine dispense into the carafe. Place an additional 8 ounces of white vinegar into the carafe, and pour back into the reservoir. Let the water heat up again, and let the vinegar solution sit in the reservoir for about 30 minutes. Top off the carafe with cool water and allow the carafe to cool with the warming plate turned off. After the 30 minutes, pour the contents of the carafe back into the reservoir, and it will dispense again. The water in the reservoir will heat up again. Check the coffee filter for residue. If you see a lot of grainy material, change the filter, and repeat the cycle until the filter comes out clean. Save your old filters as you go. Lay them out in order on paper towels, and you'll be able to mark your progress. When the filters clear up, discontinue recycling the vinegar solution and, instead, fill the reservoir with fresh water. The sediment has by now been freed up (de-scaled) and will continue to come off in smaller and smaller quantities. Each time you place fresh water in the machine, the dispensed liquid will smell less and less like vinegar. When no vinegar odor can be detected, you are finished.
Best regards, --W/D--
4/6/2011 5:17:44 AM • Bunn BT10B... • Answered on Apr 06, 2011 • 189 views
0helpful
1answer

When I pour water into the top to activate the

Sure it's one of two gaskets. If it's the one from the reservoir to the tank then you can get it free from Bunn if it is the gasket in the tank that seals the top to the bottom. Then you'll need to contact Dave at http://alltempparts.com 02747.0000
~MotoGenius
2/10/2011 6:45:24 PM • Bunn BT10B... • Answered on Feb 10, 2011 • 188 views
0helpful
2answers

I have a Bunn BT10-B coffee maker. I need the two

If you will call 800-352-2866 with the model and date code, we will be happy to help you.
2/10/2011 5:12:07 PM • Bunn BT10B... • Answered on Feb 10, 2011 • 617 views
0helpful
4answers

My bunn coffee maker leaks

You need to replace the washer kit inside the top of the maker. Remove the 3 screws that fasten the top and lift it off. You will see the rocker leaver that allows the water to flow into the tank. At the point where the rocker stops the water there is a series of washers that degrade from the heat over time and allows the leak. The washers are very easy to replace. The problem is finding the washer kit. I found it at: www.buyitnow64.com for $3.95 plus shipping (FedEx is only $9.98). I bought 2 (one for backup) kits.The original washers lasted almost 6 years. I had repaired this problem before with a washer from my shop but it broke down rather quickly from the direct heat from the tank. This washer kit is a Bunn washer kit that is supposed to fit all Bunn machines both residential and commercial.
Hope this helps. It took me 2 hours on line to find the washers!
2/10/2011 5:08:25 PM • Bunn BT10B... • Answered on Feb 10, 2011 • 4,273 views
0helpful
2answers

I have a BUNN BT10-B

The seal kit is available free of charge through Customer Service at Bunn. If you will call 800-352-2866 and have the model and date code from the bottom of your brewer and we will be happy to assist you.
2/9/2011 9:39:19 PM • Bunn BT10B... • Answered on Feb 09, 2011 • 1,145 views
0helpful
1answer

Loud boiling tank

Ear plugs will prevent hearing damage from loud equipment.
1/28/2011 6:21:08 AM • Bunn BT10B... • Answered on Jan 28, 2011 • 89 views
0helpful
1answer

Our Bunn model B10B starting

The water tray is not available but we do have gaskets that usually will fix the leak. If you will call us at 800-352-2866 with the model and date code and we will be happy to assist you.
1/18/2011 4:54:25 PM • Bunn BT10B... • Answered on Jan 18, 2011 • 365 views
0helpful
1answer

My Bunn does not get

If you will get the code date and model number from the bottom of the machine and give us a call, we will be happy to assist you in resolving this issue. The phone number is 800-352-2866.
1/18/2011 4:50:41 PM • Bunn BT10B... • Answered on Jan 18, 2011 • 139 views
Not finding what you are looking for?
Bunn BT10B Coffee Maker Logo

85 questions posted

Ask a Question

Usually answered in minutes!

Top Bunn Coffee Makers & Espresso Machines Experts

Dennis

Level 3 Expert

1057 Answers

john h

Level 3 Expert

25748 Answers

ADMIN Canada
ADMIN Canada

Level 3 Expert

41699 Answers

Are you a Bunn Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...