Top 20 Quad Qmd-6 Mechanical Disc Bicycle Brake 160mm Rear Questions & Answers

The model number and serial number on your Kawasaki Engine is located at the rear of the engine on the engine housing

If there is no obvious connection, it may just be a breather hose for the engine.

Need a new battery

Here is a Suzuki forum talking about your tire problem. https://www.suzukiatvforums.com/forums/wheels-tires/1339-tilted-rear-tire.html

Depends on size, load and usage. Check side of tire or manufacturer's info/website. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Google the make/model, or put in motorcycle area, not bikes. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Here is the detailed link. Watch it.

try this link and try ebay for the pull start. https://www.google.co.uk/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=skyteam+st+40+kiddies+quad+bike+and+a+workshop+manual

All you have to do is Google "assemble chad valley quad" to find videos. One of these should work: Redman and Associates 12V Quad Bike Assembly 6v Large Quad Bike assembly instructions I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

It is possible. What you do is eliminate the unit and all the wires and wire the engine direst to the kill switch You need power to the coil from the kill switch, that's all. the second wire is ground, or depending on the design the kill circuit may be the ground side of the circuit. in any case the wire on the coil is positive power. you should find it fairly simple to eliminate the remote system if you think of basic requirements for the machine to run. Most remotes simply cut the power off. You will definitely need to connect 2 of the wires together. Judging from your pic I would cut all the wires and connect same color wires together.

AT your KXD dealer check on ebay or amazon for another source

be checking fuses both near the battery and behind the headlight..

you may want to consider installing a battery. just run the wire from the magneto to the positive terminal. Ground the negative wire to the frame.

The regulator does get hot normally you can glue a cooling grill yo it to help cool it, basically build a heat sink out of aluminium for it. put it where it will get some air blowing over it. As can example you will notice on a Harley that the regulator is mounter in front of the engine where it gets lots of air blowing over it.

what info are you looking for?

Replace it.

you should find it in the area of the gear box or transmission if you wish. Normally they are set up to turn the gear on the transmission that is connected to the engine crank shaft.

LOL, Replace the resistor.

Check for a rock or thorn in the tire. Feel the inside of the tire carefully There is some thing there that keeps poping the tube. Have fun. Be safe. Vern .

turn the carb screw all the way in and back it out 1 1/4 turns. This should work. if you need more... do it in 1/4 turn increments.