20 Most Recent Rado Diastar Anatom Jubile watch Questions & Answers

Hears how i do my watch, i have the same watch as you.Just make sure nothing is displayed on the clock face by turning the winder, ie NO digital time, NO daul time, NO alarm, NO stop watch etc, Pull out the winder(crown) and adjust the hands to the time you require by spinning the winder.(Gentley for mins and fast for hours) The digital clock will display wilst doing this, but not change the time.handy if you want to sync both clocks.Push the winder back in at the time to sync and the digital display will go out, then spin the winder again if you want to display the digital features. I hope this helps, please post if it does, Maurice Chevalier- Herts

Rado Diastar... | Answered on Jul 23, 2019

The shaking is not the best way to restart the automatic watch as it puts slight strain on watch balance wheel and hairspring (most delicate part in watch).
As watch balance wheel is positioned paralel(leveled) to watch dial, you have to spin your watch back and forth a few times quite quickly.
(Imagine you are turning steering wheel in your car- thats the right motion). Before doing that wind up your watch a few times manually.
Right after doing that observe the seconds hand and if it is ticking just a little bit or ticking back and forth and then stops- your watch has jammed gear train and this is the reason why it stops.
If you don't have seconds hand- after shaking your watch listen for ticking and again- if it stops after short run, the gear train is to blame. In this case you will need watchmakers help as special skills and tools are needed to sort this out.
Do not forget to rate, please.

Rado Diastar... | Answered on Feb 07, 2019

You can get Watch strap and everything of watch from The Prime Luxury Boutique. It is an authorized luxury watch retailer. http://theprimewatches.com/

Rado Diastar... | Answered on Oct 29, 2017

Hi - I have a Rado Jubilee-Black Face-Lovely Dial
Problem:Time is set with a Key - Back of the watch
I have LOST this Key & need to buy or get one?
Can you please advise - [email protected]
Many Thanks

Rado Diastar... | Answered on May 21, 2016

Send it back to rado for repair.

Rado Diastar... | Answered on Jun 11, 2012

That links are most likely ceramic! Take your watch to a reputable watch repair shop...they break very EASY! Make sure they know what they are doing!!!!

Rado Diastar... | Answered on Jun 06, 2012

The only source for separate original links is a repair shop that has a defective watch kept for parts. You could order an entire bracelet but that would be very expensive.
The cheapest solution is to get a copy like
and use its bracelet.

Rado Diastar... | Answered on Jul 13, 2011

mcdevito75 here, Best Bet with your Rado watch, Look for a small watch repair shop in your area for adjustment / replacement.

Rado Diastar... | Answered on Jun 30, 2010

Not finding what you are looking for?
Rado Diastar Anatom Jubile watch Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Rado Watches Experts

Bruce Robin

Level 2 Expert

300 Answers

ray gallant

Level 3 Expert

68239 Answers


Level 3 Expert

3157 Answers

Are you a Rado Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rado Watches

  • Rado Watches

Most Popular Question

rado watch chain break

  • Watches