Craig CMP741d Tablet - Answered Questions & Fixed issues
My sons friend changed his password and everytime I go to reset it it just turns off. How do I reset?
- First, switch your tablet off.
•Then, power the tablet back up by holding down the volume (either + or - ) and power buttons simultaneously.
• Continue holding the volume button until the screen says "Booting tablet in recovery mode."
• This will give you a picture of an Android.
•Tap the android, and you will be given a screen with several options.
•Move between the options with the + and -, and select with the power button.
•Go to the option for Factory Data Reset and select it.
•Scroll down to `the Yes, and then the tablet will erase its memory back to factory settings.
•Once it has completed, select Reboot Tablet Normally.
My tablet wont take a charge
what i did with mine was opened it up to expose the inside i found that a few wires and plugs had wiggled them selves lose.I put it back together and it worked.craig makes these tablets very cheaply.i will never by another craig product again.i now have a samsung 3 and love it bo issues what so ever.got tired of all the problems i had with craigs tablets and gave it to my niece.hope this helps.
I have no volume no sound Would a Hard Reset fix this problem?
A hard reset is worth a try but it is unlikely to fix the problem, it sounds like a hardware issue.
Here are instructions for a hard reset
Make sure the tablet is OFF.
Press and hold the Volume Up and Power buttons at the same time.
When the Android starts to flash, release the buttons.
Then try to press different hardware buttons until you are given a list of options.
Note: If Volume Up and Power doesn't work, try Volume Down and Power. I’m happy to help further over the phone at
https://www.6ya.com/expert/jonathan_828b54f422cbefdd
12/26/2014 10:45:21 PM •
Craig CMP741d...
•
Answered
on Dec 26, 2014
•
277 views
How to reset my tablet to factory setting
So easy, just look arround your tablet and find a small hole that says Reset Just press it for more than 10 seconds turned on and that is all.sets at Factory default. with that you will erase all, even passwords
How do i hard reset my tablet?
look for a reset hole arround the device.just press it for more than 10 seconds and it is all(always the reset hole is near the pluggings holes like charging,earphone,USB connection)it is a very small hole that you have to use a pen or an unfolded clip
Forgot password on icraig jelly bean how do i reset it
First, Turn your device off.
Now, press and hold the down volume button, while holding down the button, press the power button until the display turned on. then go to recovery by navigating up and down through the volume buttons.
Then quickly press the power button to confirm. And there, your device will start resetting to factory default.
How to check for missing drivers
Adb Drivers in windows for interfacing with the tablet or drivers within the tablet?
If its within the tablet you will need to shell su and have the device rooted - In other words you will need to be technically savvy and good with linux command line!
Password
power off then hit reset button (usually a pen tip will work). If no reset hold all buttons down. restore to manufacturer.
Not finding what you are looking for?