The wiring is bad on the plugs and shorting out, or whatever is on the end of the cable has an issue. Also look along the cable for rodent, cat, dog chewing.
Questions like this need 'make model (what is is) of every item involved. On a vehicle 'year make model' as well.
The bad ground causes the amplifier to go into the protect mode. So, make sure to check the grounding wire and overall connection to figure it out and set back the amplifier to its normal mode.
Feb 15, 2023
There are a few solid state fuses inside but if the speaker wires were shorted then it required an authorised Pioneer service centre to repair the damaged amplifiers section.
Input from radio left 3 terminals, -, L+, bottom screw R+ / Output to Right speakers on next 2 columns F+ R+ on top, F- R- on bottom / Output to Left speakers on next 2 columns F+ R+ on top, F- R- on bottom / last 2 wires Black 12 negative and Red 12 volt positive w/ 5 amp fuse inline.
first check all the power connections verify every thing is hooked up correctly. check the fuses. and the amp has to have a separate wire called remote going to the back of the head unit. the head unit sends a signal to the amp to tell it to turn on when the head unit is powered on.
JustAnswerhttps://www.justanswer.com > TV Problems
Jan 27, 2010 - If you get TV power and volume to work in the AUX mode you could then do a Volume Lock for the AUX mode so that pressing Volume will be locked ...
1 answer ยท Top answer: Greetings, I'm assuming the TV will operate manually with the buttons on the front of the ...
....
if there is a Reset button at the front face of the Radio, or else full restart can only be done by removing the battery terminal. but make sure you still keeping the Code, may ask for Code if it is Code protected.