Top 20 Bazooka ELA300.1 Car Audio Amplifier Questions & Answers

0helpful
1answer

My amp just stopped working the other day while i

blown fuse in amp or blown transistors in amp might check ground but i dont think thats it make sure no paint in the way on ground
5/16/2010 5:07:01 PM • Bazooka ELA300.1... • 178 views • 0 helpful votes
0helpful
1answer

My amp is draining my battery, but still seems to

No doesnt sound defective if it works, but your alternater may not be powerful enough to maintain both your battery and car needs as well as power your amp. Best idea would be to look into getting a different alternator with a higher output.
2/1/2010 5:25:01 PM • Bazooka ELA300.1... • 77 views • 0 helpful votes
0helpful
1answer

Heats up

It's normal for amplifiers to heat up during normal operation. If you power up the amp and let it idle (no audio) for about 5 minutes and it remains cool, the heating (when listening at high volume) is likely perfectly normal.

let me know if you have any other questions.
12/19/2009 7:15:18 AM • Bazooka ELA300.1... • 106 views • 0 helpful votes
0helpful
1answer

My protection mode red light comes on right when i

Check your ground most definitly!, Replace it if needed. Check your remote wire and power wire as well. And if none of this works, then you are having internal issues.
8/26/2009 10:42:29 PM • Bazooka ELA300.1... • 303 views • 1 helpful votes
0helpful
1answer

Csa300.1 bazooka 500 watts

sounds like you may have blown your sub...sheck the spyder inside of it and see if it is stiff..if the speaker doesnt seem too responsive when you press on it, its probably blown...
8/1/2009 8:45:13 PM • Bazooka ELA300.1... • 199 views • 0 helpful votes
0helpful
1answer

Red Led Light on My Bazooka Ela300.1

Your amp went into a " Protection Mode "
this happens if you have blown something inside like a IC or something... if the amp have been dropped or bumped then its very likely to happen ... Check and see if your fuses are ok, if not then it would be best to let it be checked by a expert if its a IC or a cap inside
Cheers
12/18/2007 11:42:22 PM • Bazooka ELA300.1... • 597 views • 1 helpful votes
0helpful
2answers

Whats wrong??

you should check the remote wire bc you will get power to your amps if its not hooked up but you wont get any music!
8/22/2007 7:14:51 AM • Bazooka ELA300.1... • 137 views • 1 helpful votes
0helpful
1answer

Bt8250d is cutting out

Loose connection or your power cable and earth cable to your amp are not a heavy enough gauge.
8/6/2014 9:07:40 PM • Bazooka Car... • 112 views • 0 helpful votes
0helpful
1answer

Speaker Fried, is my Amp toast too?

You are sending TOO much power to the speakers, Replace the speakers and then get a much smaller amp that is within the ratings of the speakers. ACTUALLY you should get an amp that is aboout 1/2 the total rating of the speakers.

You should ALSO procure a sound meter to verify the sound level is within safe limits. If you insist upon abusing your ears with too high a sound pressure, be ready to buy hearing aids at a VERY young age.

You also need to know that the enclosure of the speaker plays a part in keeping the speaker from tearing itself to pieces.

MANY of the auto sound system installers are hacks that don't do it right and you see what happens to your expensive equipment!

Using even a Radio Shack sound meter properly will protect your preciuos hearing for later life.
12/22/2009 9:07:32 PM • Bazooka Car... • 149 views • 0 helpful votes
0helpful
1answer

Bazooka amp

If the amp is in protect mode, it probably has shorted output transistors. To eliminate other possible problems, do the following. I'll assume that you've checked the amplifier's on-board fuses.

With your multimeter set to DC volts, the black meter lead on the ground terminal of the amp (not on the point where the ground wire connected to the vehicle) and the head unit on (so the amp will have remote voltage applied), touch the red lead alternately to the B+ and remote terminals of the amp. If the voltage is below ~11 volts, you need to check the wiring feeding whichever line is too low.

Disconnect all speaker wires from the speaker terminals of the amp and disconnect signal cables from the amp. If it powers up, the wiring needs to be checked. If it remains in protect mode, the amp almost certainly has shorted output transistors and will need to be repaired.
6/15/2008 4:07:21 PM • Bazooka Car... • 677 views • 2 helpful votes
0helpful
1answer

ROHL Aqui Two Handle Widespread Bathroom Sink Faucet

Look on the back of the handle with a mirror and you should see a recessed Allen screw. Some have a decorative can on top marked H & C, or red and blue. Those pop off. No info online, but this unit comes under many names, I answered one today already, low quality, high price and probably made in China or korea. https://www.google.com/search?q=ROHL+Acqui+Two+Handle+Widespread+Bathroom+Faucet+tighten+handle ..
11/11/2022 4:32:34 PM • Car Audio &... • 23 views • 0 helpful votes
0helpful
2answers

BOSS Audio BV9976B In-Dash Single DIN DVD Player and 7 inch Motorized Touchscreen Monitor. Slide in a DVD/CD. Why can't I Bluetooth videos on my BV9976B?

Question edited to add 'FULL 'make model (what it is). There is a crucial word missing between 'I' and 'Bluetooth'. That verb is the key to answering the question. Bluetooth is only for calls, you can't stream videos if that is what you are trying to do? Here is the manual. https://www.google.com/search?q=boss+bv9976b+manual+bluetooth ..
11/9/2022 11:32:47 AM • Car Audio &... • 21 views • 2 helpful votes
0helpful
2answers

Onkyo tx-sr603x shuts off every time a button is oressed.

I would check the uProcessor power supply has the correct voltage on it.
10/19/2022 2:43:22 AM • Car Audio &... • 29 views • 0 helpful votes
0helpful
1answer

My kdc-bt640u keeps starting up in standby when I turn the ignition on and it forgets the last radio station I was listening to once iv turn it on is there a way to fix this?

Hi, Please double check that your "demo mode" is turned off. If you just got the car or it started having these issues and you're still leasing, please call your dealer to ask if they have any troubleshooting steps for you. If you have the kenwood product's manual available, you could use the table of content to find the section for setting memory on your kenwood. Thank you.
10/12/2022 12:58:53 PM • Car Audio &... • 30 views • 0 helpful votes
0helpful
1answer

MY DISPLAY IS HIGH WITH A DOWN ARROW KEY

Impossible to answer. No indication of what 'it' is!'make model (what it is)' in all questions please.
11/6/2022 7:39:13 PM • Car Audio &... • 19 views • 0 helpful votes
0helpful
2answers

Looking for specs for mA15IL subwoofer

from amazon: Brand MA Audio Speaker Type Subwoofer Recommended Uses For Product Music Mounting Type Car Mount Controller Type Voice Control About this item
  • 900 Watts Power Handling - 450 Watts RMS Power Handling
  • 4-ohm Copper Clad Aluminum Wound Dual Voice Coil
  • Hi-Temp Kapton Voice Coil Former
  • 150oz. Double Stacked Strontium Magnet Structure
  • Platinum Plated Block Terminals
10/4/2022 5:45:37 PM • Car Audio &... • 29 views • 0 helpful votes
0helpful
1answer

I need the pin layout on the ug for a cq-vx100u please.

Look for it here
10_5_2022_7_37_59_am.jpeg
10/5/2022 6:15:49 AM • Car Audio &... • 27 views • 0 helpful votes
Not finding what you are looking for?
Bazooka ELA300.1 Car Audio Amplifier Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Bazooka Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5047 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Are you a Bazooka Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bazooka Car Audio & Video

  • Bazooka Car Audio & Video

Most Popular Question

protection mode red light comes right

  • Car Audio & Video
Loading...