20 Most Recent
- Page 9 Questions & Answers
Wiring/Installation of Pioneer CD Player
You need to get an installation kit that also has the universal wiring harness to connect to the factory harness in the car. That way you only need to match the wire colors of the Pioneer harness to the wire colors of the universal harness and made good connections and insulate those connections. Then the Pioneer harness plugs into the Pioneer radio and the universal harness plugs into the factory harness in the car.
Let me know if this helps, or if you need more help.
Wiring diagram for 1999 chevrolet express, radio
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue
Will checking out reviews regarding 1000 watt ebike aid in choosing before getting?
Trying to find the best 1000 watt ebike might not be that easy as a result of the selections readily available. With the increasing need on ebikes, the accessibility has additionally improve up. Constantly review testimonials first before you pick one because each ebike supplies various functions. Always consider your demands to get satisfied with your choice. Visit this site https://powermaxebike.com/product-category/1000w/ for more info.
CD not working. Error 12 message
error 12 is a read problem.
Most of the time it is an alignemt problem with the laser.
Sometimes it can be the mechanism, or vary rarely a dirty laser lense, or disc.
This error message merely means that it cannot play the disc. It is usually due to the laser diode inside the optical pickup head is weak, misaligned, or defective. But, it could also mean the tracking and focus adjustments have been jarred too far out. Or, it could be mean the servo controller for the head and motor drive has gone bad. Anything that prevents the system from reading the digital information on the surface of the disc will bring up the error code.
So, you must either have it serviced to find out the cause - or just replace it. This model is no longer current but there are many from Pioneer and others that could be an equivalent unit.
Not finding what you are looking for?