20 Most Recent Bazooka EL1500 Car Audio Amplifier - Page 8 Questions & Answers

0helpful
1answer

How to turn off demo mode on jensen vm9215bt when

Here is a quick video tutorial for Model VM9725BT.https://youtu.be/kNHDkZu4pos I got pretty frustrated until I finally found the option. Hopefully it is in a similar spot.
5/20/2022 3:51:29 AM • Car Audio &... • Answered on May 20, 2022
tip

Need a Vehicle Radio Code?

There are only three ways to do this. 1. Take it to your local local dealership for your make of vehicle. You will need to provide the registration document and they will give you the code for free based on the vehicle VIN Number. 2. Look for a small white sticker in the glove compartment or the centre console. When the car is new, this sticker is supplied with the manual with those instructions. 3. You pay an online Radio Code Decoding company. Many of them say 'Free', but most charge about $15 or £12 UKP. The major sites are trustworthy and will work with you, or refund if the code doesn't work. The sites need the Serial Number of the radio which is either engraved to the radio chassis, or on a sticker at the rear or sides hidden from view. This link is for Fiat, change the Search Query to your make. https://www.google.com/search?q=Fiat+radio+code ..
on May 19, 2022 • Car Audio & Video
0helpful
1answer

Was wondering if i could get help on wiring a 1989 Jeep Wrangler YJ radio?

Make and model of vehicle may help you get an answer.
5/10/2022 7:06:01 AM • Car Audio &... • Answered on May 10, 2022
0helpful
5answers

'Please insert correct map disc'

here you go .

http://www.gps-guru.com
5/1/2022 7:24:48 AM • Car Audio &... • Answered on May 01, 2022
0helpful
5answers

Ford 6000 cd unlock code?

i have ford cd 6000 rds need help with cod serl is m179273 thanks
4/27/2022 11:28:34 PM • Car Audio &... • Answered on Apr 27, 2022
0helpful
1answer

Circuit diagram for audio reflex#eq-2

1 Hook up your equalizer to your receiver if it does not have preamp-out channels. The equalizer should always be between the receiver and the amplifier. Your amplifier will need integrated preamp-out and preamp-in connections to work with this method. 2 Purchase 2 pairs of RCA cables. To run a signal from your stereo receiver to the equalizer and back again, you'll need 2 sets of RCA cable (the same kind that is usually used to connect source components like turntables and CD players).
  • The length of the RCA cables should match the length of the distance between the receiver and the equalizer.
3 Connect one pair of RCA cables between the receiver and equalizer. Connect one pair of cables to the tape monitor output channels on the receiver and the other end of the cable to the left and right channel inputs on the equalizer.
  • You will usually find these channels on the rear of the equalizer.
4 Connect the other pair of RCA cables between the receiver and equalizer. Connect the other pair of cables from the output channels on the back of the equalizer to the tape monitor input channels on the back of the receiver.
  • Right channel jacks will usually take the red colored RCA plug while left channel should take white or black RCA plugs.
5 Use your equalizer. Turn on the receiver and switch the front panel output control to the "Tape Monitor" setting. This opens the tape monitor channels and means that the sound will travel through your equalizer before being sent to the amplifier. Adjust the equalizer knobs according to your preferences.
  • You should now be able to manipulate the controls on the equalizer to change the frequency response or tone of your music.
  • To switch on the "Tape Monitor" setting you should depress the button on the front panel of the equalizer.
  • If you have a tape deck connected to the tape monitor channels then you will have to remove this before connecting your equalizer.
4/25/2022 7:06:49 AM • Car Audio &... • Answered on Apr 25, 2022
0helpful
1answer

Can not find where to

the blue wire with a white stripe is used to control other devices like an external amplifier or a power aerial via a relay as 300mA max 12V . So it would energise a relay coil to switch another device via the relay contacts. see this you tube video from pioneer https://www.youtube.com/watch?v=-bF3uzzaT30 at 4 minutes into video

d49394ca-3a7a-4832-b7fb-f3b37568abc3.png
4/21/2022 9:52:11 AM • Car Audio &... • Answered on Apr 21, 2022
0helpful
1answer

Keycode for 3000 traffic by Ford. M144887 TIA

Contact your Ford dealership for advice. They should have it on their database.
4/20/2022 4:49:53 PM • Car Audio &... • Answered on Apr 20, 2022
0helpful
2answers

How can I get the reset code for my Citroen Relay radio?

dealer with vin and proof of ownership
4/18/2022 7:08:03 PM • Car Audio &... • Answered on Apr 18, 2022
0helpful
2answers

I have a pioneer deh p4400 detachable faceplate

Did you clean the contacts on both the face and the sub-panel? What did you use to clean the contacts with? Sometimes cleaning the contacts with a pencil eraser will work a little better.
4/17/2022 8:48:20 AM • Car Audio &... • Answered on Apr 17, 2022
0helpful
2answers

Need Security code for Panasonic car radio Model CQ-JC179AA. Serial number R31017

CODE RADIO PANASONIC CQ-179AA EV455 66AR0 B SERIE R31017
4/9/2022 9:12:25 AM • Car Audio &... • Answered on Apr 09, 2022
0helpful
2answers

Code Blaupunkt tipo CAR 300 F 90 533 422

If the radio came with the vehicle when new, (OEM Spec) look in the glove box for a small white sticker, or in the manual for the entertainment system. Or you can take the Registration document to the dealership and they will give you the code for Free. Or, you pay a company like www.radiocodes.com a $12 fee for the code based on the serial number of the radio. No one here can supply your code to you. https://www.google.com/search?q=Code+Blaupunkt+tipo+CAR+300+F ..
4/1/2022 6:49:52 PM • Car Audio &... • Answered on Apr 01, 2022
0helpful
2answers

Who can give me radio code?

dealer with vin and proof of ownership
4/1/2022 6:42:17 PM • Car Audio &... • Answered on Apr 01, 2022
0helpful
2answers

My Alpine CDE-W235BT bluetooth has stopped working after a failed update. How do I fix it?

Sounds to me like the firmware is damaged, try flashing it with another firmware, or maybe updating it with the same update but successfully if possible.
3/31/2022 3:27:44 PM • Car Audio &... • Answered on Mar 31, 2022
0helpful
1answer

How to stop my epicenter from passing audio to amp

IT IS HOOKED UP THRU SUB OUTPUT ON YOUR HEAD UNIT OR EQ, ?
3/21/2022 12:19:25 AM • Car Audio &... • Answered on Mar 21, 2022
0helpful
1answer

I need the wiring diagram for Delco disc changer model number 09370385 please.

This would be better search by the vehicle, not the radio itself. year make model cd changer wiring Help here https://www.google.com/search?q=delco+disc+changer+model+09370385+wiring+diagram ..
3/17/2022 8:57:15 PM • Car Audio &... • Answered on Mar 17, 2022
0helpful
1answer

How to install Boschmann to 2.1 Genetic Amplifier please?

lots on information on Genetics in the link, but not much else. Contact the maker or search out the installation manual. https://www.google.com/search?q=install+Boschmann+to+2.1+Genetic+Amplifier ..
3/12/2022 2:23:55 PM • Car Audio &... • Answered on Mar 12, 2022
Not finding what you are looking for?
Bazooka EL1500 Car Audio Amplifier Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Bazooka Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5048 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Are you a Bazooka Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bazooka Car Audio & Video

  • Bazooka Car Audio & Video

Most Popular Question

2 bazooka el 1500 amps

  • Car Audio & Video
Loading...