20 Most Recent magicJack Plus - Page 4 Questions & Answers

Thank you for the inquiry.
It would be helpful to know which printer this is, when the error occurs, and how old the printer is.
I suspect this is a HP LazerJet and possibly a firmware issue. If it's still under warrenty HP Support will walk you through the steps to upgrade the firmware.
Before contacting your dealer make sure it is not a document you are trying to print which is causing the error. The 49 error is a firmware error and most of the time it is because a document confuses the printer either with its coding or composition. Sometimes just updating the firmware on your printer will fix it. Sometimes copying the ofending file to another file and printing the new file will solve the issue. Clear out the print que so nothing is being sent to the printer. Now reactivate the network card and first try with a simple test page and work from there.
I hope we've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response.
I hope I've earned a good rating from you today.
Please post a comment if you need additional assistance so that I can help you further.
Best regards,

Office Equipment... | Answered on May 18, 2020

With respect to which office machine ............

Office Equipment... | Answered on May 18, 2020

The door switch might be broken then and is not positioned correctly or not properly being positioned while the door is closed then.

Office Equipment... | Answered on May 17, 2020

The colour purple then blue and red make the colour purple when these colours are mixed together.

Office Equipment... | Answered on May 17, 2020

Disable Power Save from the Control Panel
Type "power options" into the search box. Click "Power Options." Click "Show Additional Plans" in the "Select a Power Plan" section. Select the blue "Change Plan Settings" link next to the High Performance setting to open the plan settings editor window.


Office Equipment... | Answered on May 14, 2020

For me, dissertation writing is totally out my mind. All i know is that its a part of big sea of literature where i never wanna swim out. If you are pretending same then you can call powered essay to drag out from this problem as it has been dragging me out of the problem all the time when i was in the problem.

Office Equipment... | Answered on May 14, 2020

Yes, you can if you want to.

Scholarly articles for printing continuous forms

Double-sided printing system for continuous forms - ‎Sugisaki - Cited by 49
... and method for printing separating continuous forms ... - ‎Dash - Cited by 12
... and apparatus for producing manifold continuous forms - ‎Murray - Cited by 9

Design Your Own Business Forms: Continuous Forms

www.smartresolution.com > Business Forms
Smart Resolution helps you design and print your own continuous forms. For use with tractor feed, dot matrix or pin feed printers.

Continuous Forms Printing, NCR Forms, contiuous printing ...

business-forms.net > short-and-long-continuous-forms-for-banking-a...
Continuous Roll Forms are a cost-effective way to produce large volumes of custom forms. Custom continuous forms and snap set forms can include combinations of the following features: Up to 8 colors on 22?, 17? & 14? Forms - Printing 4/4 in a single pass equals savings for our clients.

Office Equipment... | Answered on May 13, 2020

Hello Margaret

That is a serial number not a model number.


make model manual


Office Equipment... | Answered on May 13, 2020

E 07 is a common error code in conlog prepayment meters. This error code could mean:
1, available voltage is below minimum operating voltage (160volt) of the meter.
2, there is a faulty component in the meter.

Office Equipment... | Answered on May 13, 2020

C360 error: "Replace Image Transfer Belt Unit"
The error message under that title is "Have the image transfer belt replaced soon." It's a new unit, but resists doing the Gradation Adjust. Tried returning the old belt (which was working before the replacement) and error message remains, so apparently the problem is not with the new belt.

System Error Clear (System 1 -> Initialization) gives "Result: OK" but has no effect; the problem remains after machine restart. However, it does NOT at any time give L-5 error (Transfer belt unit accumulated rotation time excess warning), just continues to say "replace image transfer belt unit", and will not allow anything else to proceed. What am I missing? (Transfer belt clutch malfunction?

Office Equipment... | Answered on May 12, 2020

Error code E102-29 means the function cannot be performed without a valid subscription and the PVR product is missing from the smartcard. The only recourse is to contact MC call center and get them to verify your subscription details and maybe re-activate/reset your subscription details.

Office Equipment... | Answered on May 09, 2020

3 Method to Fix Epson Printer Error State:-

Method 1: Check the connection and restart your Epson printer.

Method 2: Update Printer Driver.

Method 3: Contact Printer Support.

Epson Printer Error State is an error usually displayed when the printer is jammed, low in paper or ink, the cover is open, or the printer is not connected properly, etc.

You can check whether the connection between your printer and computer functions normally. The Epson printer in error state can also result from the faulty or incompatible printer driver. If you have tried the methods above and the error continues, you may need to contact the Printer support team to resolve Epson Printer Error State.

We have here provided some simple and easy steps through which it would be helpful for all users to fix the printer error. Therefore, for an instant solution, scroll down and follow the blog to fix Epson Printer Error State.


Office Equipment... | Answered on May 09, 2020

Canon Pixma Mp258 Error Code and Possible Solution

P02 (Carriage error)
1.Make sure no foreign material stuck to the print head railway.
2.Clean and check the print head encoder strip cable (timing **** film or encoder strip is a white line on the back of the box set of ink lines may be missing or mess up the ink.P03 (Line feed error): an error in transmission line entering the line feed (LF) is a signal telling the printer to move to another line or a whole new line that would not otherwise have reached the end of the line.
1.Check wire print head position (timing **** disk film) on the side of the machine.
2.Check PCB logic board.
P05 (ASF sensor error) sensor for paper feed error.
1.Try to replace the following:
•ASF / PE sensor unit.
•Drive unit.
•PCB logic board.
P06 (Internal temperature error): caused by abnormal heat inside the printer.
P07 (Ink absorber full): the Ink Wastepad (sponge) inside the printer is full
1.Replace the wastepad inside the printer or install waste ink bin outside the printer
2.then Reset counter protection.
P08 (Print head temperature rise error): caused by thermal print head temperature exceeds a threshold.
1.Replace the new cartridge print head and / or change a new logic board.
P09 (EEPROM error): caused by corrupted or defective EEPROM chips of the printer.
1.Replace the logic board.
P15 (USB VBUS over current): caused by too much current, try removing the USB cable and then plugin again, if solve the error, try to replace with a new USB cable. If the error still exist replace the logic board.
P20 (Other hardware error): The failure of other hardware.
1.Try to replace the logic board.
P22 (Scanner error): a scanner malfunction.
1.try to change the scanner unit or change a the logic board.
E13 or E16: Ink has run out

1.Pressing the Stop / Reset button for 5 to 8 seconds until the led screen display number 1.
E04, E05, E14 or E15: Cartridge may not be installed properly
1.Reinstall the ink cartridge.

Office Equipment... | Answered on May 08, 2020

To do that please follow the steps below:
  1. Open Control Panel.
  2. Select Hardware and Printers option.
  3. Right click on the Network printer (your printer).
  4. Choose Properties.
  5. Go to the Ports tab and choose Configure.
  6. Uncheck SNMP Status Enable option.
  7. Restart the computer and check if the issue persists.

Office Equipment... | Answered on May 08, 2020

Not finding what you are looking for?
magicJack Plus Logo

80 questions posted

Ask a Question

Usually answered in minutes!

Top magicJack Office Equipment & Supplies Experts

ray gallant

Level 3 Expert

67908 Answers

C. David Graves

Level 2 Expert

69 Answers

Brad Brown

Level 3 Expert

18330 Answers

Are you a magicJack Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

magicJack Office Equipment & Supplies

  • magicJack Office Equipment & Supplies

Most Popular Question

magicjack lot static line dropping every

  • Office Equipment & Supplies