20 Most Recent Adobe Audition 1.5 - Page 4 Questions & Answers

You can set the default mic that you want to use in start/controlpanel/sound and audio devices/voice

Change the voice recording selection to your digitel recorder

One of these must be the case:

1. You've not enabled monitoring in multitrack view.
2. The hardware setup is not correct under multitrack view.
3. You may have to (I forget if this was the case for sure or not) send each signal you're listening to to the Master... I'll have to look at home..

If that doesn't work, offer these clarifications, and I may can check into at home:

1. What version of Windows or other OS?
2. What version of Audition?
3. What sound hardware do you have installed (more than one? - please provide specific card(s)/device(s))

It's got to be either latency or something causing the movement.  I doubt you'r making the same mistake with your mouse every time, so my guess is a program on your machine if it isn't the latency thing.
Here are some questiosn for you:

1. How old is your Windows install?
2. What sort of security apps do you have running?
3. Are you 100% sure your system is clean of any possible malware?  There are several apps to try to make sure - don't depend on one application for security, too risky.
4. If you disconnect from the internet during recording, do you get the same issue(s)?

1. What version of Audition?
2. What version of Windows - or other OS?
3. Edit View and/or Multi-Track view issue?
4. Are you recording in Multitrack view, then listening in Edit view?  Each has its own hardware setup..

My best guess is that one of these thigns are true:

1. You have not enabled monitoring
2. In multitrack view, I believe you have to send each signal to the master, and then enable monitoring for the Master... but I can't remember for sure.

Post back to let us know

My best guess to start with is a reverb setting of some sort.
Are you recording in multitrack or edit view?  If one, try the other, and see if you get the same results.
Another guess would be a sound-card setting.  If you have any special effects setup on your soundcard (onboard, pci, pci-express, usb, etc), that could cause it.  Things such as 3d-surround settings, environmental settings, etc..
Also, what version of Windows?  What sound card/ audio interface?

If you're wanting to use the Yamaha ASIO driver direct via USB, first make sure you have the driver installed.  Second, you have to enable the ASIO driver in the audio devices setup portion - or you can just go to your Windows Audio settings, and change the recording hardware to the Yamaha one.
Then you'll be able to record to 1 Stereo or 2 Mono channels off of the Yamaha ASIO driver.
It's more tricky doing it that way than just feeding the line-outs into your onboard or PCI/PCI-eX sound cards.
Poast back if you have more questions.  I'm at work now, but I can look at the specifics when I get home if you need further assistance.
If you need further help, be sure to post this info: 1. What version of Audition 2. What version of Windows 3. What type of soundcard do you have (if you want to do anything through that route).

Adobe Audition 1.5
Hi there,
It seems your adobe audition 1.5 is missing file / files or adobe's registry has gone corrupt. If you ever run registry cleaners or registry fix some of them corrupt the registry of this adobe audition 1.5 try Reinstalling the Program and it should work. This Program is very Reliable and shoud have no problems with it. I use it all the time to download from internet and then edit to my requirement. I hope this helps. If you still have problems try to down load trial software from www.adobe.com Adobe audition 2.0 is free for download to try.

Good Luck

Hello there,
Try ebay there you might find the cd on adobe audition1.5. Or email to adobe on www.adobe.com

Hi there Grusm,
It seems from what you have wriiten, your recording setttings have gone back to playing mode on your computer. Try the followings see if it sorts the problems you are having:-

• Click Twice or so on the speaker on the right hand side of START manu at the bottom right hand. A speaker volume control panel will open up displaying volume control,wave,sw synth,phone line,Aux volume,video volume, mic volume,line In and audio in.
• Make sure on the bottom of this panel volume is not ticked muted. if it is untick it.
• On the top Manu you Options and Help. Click on Options
• Select properties and Click on it, when it opens up change the setting from Playback to Recording by clicking in the round ring in front of the Recording sign. once you done that you can select the controls on the volume control panel to your requirement. Keep this volume panel minimise it while you are recording the sound, so if it needs altering you have it there infront of you at the bottom on the start manu. I hope this helped.

am pascal Mbarubukeye as seen on my profile, i would like to ask for supporting me to offer serisl number of adobe audition 1.5, because what i have was corrupted. please help me i begg!

You were supplied with the serial number on the install disc or on your purchase invoice.

It's really easy, Just search it on Google and you will get 100's of blogs & videos to download and set up adobe flash player.

You have the serial number as it is supplied when you purchase it.

You need to call adobe support and get the activation code

Nothing to do with Fixya, we aren't Adobe. It says here that Activation Servers are finished for it in 2013. Help in the forum.

Need authorization code for CS2

Adobe Community https://community.adobe.com > ... > Discussions Dec 7, 2018 - Solved: I've had to reinstall all applications after restoring Win10, and I have my CS2 Standard disks; installation itself went fine. 11 answers · Top answer: See here and use the new serial number you will be provided : Download Adobe Acrobat 7 and ...

Adobe Illustrator CS2 activation

Adobe Community https://community.adobe.com > Illustrator > Discussions May 13, 2016 - There is no longer any authorization code server. Adobe just turned it off, because apparently they just can. And they provided a replacement, ... 11 answers · Top answer: CS2 + Acrobat 7 + Audition 3 (AND EARLIER) Activation Server is gone, so read below http://helpx.ad ...

Activation Authorization Code

Adobe Community https://community.adobe.com > ... > Discussions Apr 21, 2020 - Hi RSA_dvertising, CS2 is no longer a supported product and the activation servers had to be shutdown in 2013. Replacement ..

You should never post such codes on an open forum, others may use it against your wishes.
If you call Adobe, they will straighten out the issue for you if your codes are legitimately paid for.

Apparently not recommended. It is for Sharing Files and not meant to be a back up. https://www.google.com/search?q=can+adobe+cloud+be+used+for+image+backup .. ..

The code is supplied when you purchase this software. Don't ripp it off!

well u need the keygen bcoz each serial number has its own unique authorization code on the basis of which an AUTHORIZATION CODE is generated. u may find it here http://rapidlibrary.com/index.php?q=adobe+photoshop+cs3+keygen

Register your purchase with Adobe, they'll give you the key.