20 Most Recent
Staples SPL-P500 Printing Calculator - Page 9 Questions & Answers
The staples wont penetrate the paper - they keep bending before they go through the sheets.
Ensure the staples are the correct size. If you check the end of the stapler, at the bit where the staples are bent by being pushed against, there may be 2 different width of rexess for the staple to c go in and be compressed....if it is set to the wide setting change it to the narrow setting. THAT MIGHT CURE IT, IF THE PROBLEM PERSISTS TRY BEYING SOME BRAND NEME STAPLES SUCH AS REXEL
What lubricant do you use for a Staples SPL-XC240D and where do you lubricate it?
Staples actually sells shredder lubricant. It comes in a small squeeze bottle. You actually are lubricating the shredder teeth themselves to keep them sharp and prolonging their lifetime. You simply take a piece of paper you are about to shred, run a bead of the lubricant across the sheet and feed it into the shredder. Done!
Not finding what you are looking for?