20 Most Recent LG MK2030F 30" Microwave Buiin Trim Kit - Page 9 Questions & Answers

Fuse,Time Delay Part Number: PS3522741

Usually, if you push the Stop/Clear button once or twice that will reset the panel. Barring that, unplugging it will almost always work :)

My LG microwave heating is OK but the grilling only not working

Consult lg customer service and buy anew control board.

the control board has failed due rust.

download the manual from google manual download .com

Replace the control board with a new one

short in the control board.

Jammed due to dirt. Power supply transformer deffective. One button is stuck shortcircuiting the board.

You might try unplugging it for 2 or 3 minutes, then plugging it back in. Feel free to contact me through my site if you need more help: http://www.microwavecontrol.com/

You might try unplugging it for 2 or 3 minutes, then plugging it back in. Feel free to contact me through my site if you need more help: http://www.microwavecontrol.com/

Your manual can be downloaded free here: LG Support Search Results LG AU Feel free to contact me through my site if you need more help: http://www.microwavecontrol.com/

More than likely the klystron tube is defective, that draws a lot of current. Best path here is a new MW

The most common cause of the symptoms you describe would be a shorted high voltage rectifier. You could also have either a shorted high voltage capacitor or shorted magnetron (uncommon). If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

It can be the touch pad. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

The touch pad switch is faulty. You have to replace it If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/