20 Most Recent True Direct Draw Systems: Kegerator TDD-3CT - Page 5 Questions & Answers

no you need new door henges on that thing buddy

Unfortunately, I was unable to find a direct link to a manual for the KYOTO (Iceland Ltd) Delux KU72 upright freezer. However, there are a few options that you can try:

1. Contact the manufacturer: You can try contacting KYOTO (Iceland Ltd) directly and requesting a copy of the manual. You can find their contact information on their website or through a quick online search.
2. Search online: You can try searching online for a manual using the model number or product name. Sometimes, other users may have uploaded a copy of the manual online or posted a link to it on a forum.
3. Check for similar models: If you are unable to find the manual for the exact model, you can try looking for a manual for a similar model made by the same manufacturer. The manual for a similar model may contain similar instructions and specifications that can be helpful.

I hope these suggestions help you find the manual you are looking for.

The ideal suction and discharge pressures for a Flex Ice Machine using 404a refrigerant can vary depending on several factors, including the ambient temperature and the load on the machine. However, here are some general guidelines: Suction pressure: The suction pressure should typically be in the range of 30-45 psi (pounds per square inch) for a 404a refrigerant system. This pressure corresponds to a saturation temperature of around 20-30°F (-6.7 to -1.1°C). Discharge pressure: The discharge pressure should typically be in the range of 225-250 psi. This pressure corresponds to a saturation temperature of around 100-110°F (37.8 to 43.3°C). It's important to note that these are general guidelines, and the ideal pressures can vary based on the specific conditions of the system. It's also important to ensure that the pressures are within the manufacturer's recommended range, as pressures that are too high or too low can indicate a problem with the system. If you are experiencing issues with your Flex Ice Machine, it's recommended to consult a qualified technician for assistance.

If the light on the outside of the stand-up freezer is not working, first check the light bulb to see if it needs to be replaced. If the bulb is not the issue, then check the wiring connections to ensure they are properly connected. If the connections are loose, tighten them to see if that resolves the issue. If these steps do not work, it may be necessary to replace the light socket or contact a professional to assess and repair the issue.

Yes, it is safe to leave an Igloo ice machine when it is full. However, if you plan to leave the ice in the machine for an extended period, it is recommended to transfer the ice to a freezer to prevent melting and refreezing, which can cause the ice to clump together.

If your Frigidaire chest freezer is not turning on after a short move and the light is not even coming on, there may be a few things that could be causing this issue:

1. Check the power source: Make sure that the freezer is properly plugged in and the outlet is receiving power. You can try plugging another device into the same outlet to confirm if it's working or not.
2. Check the power cord: Check to see if the power cord is damaged or frayed. If it is, it may need to be replaced.
3. Check the control board: There may be an issue with the control board of the freezer. Try unplugging the freezer for a few minutes and then plugging it back in. This can sometimes reset the control board.
4. Check the compressor: If the compressor is not functioning properly, the freezer will not cool. You may need to contact a professional to repair or replace the compressor.

If none of these solutions work, it may be best to contact a professional to diagnose and fix the issue.

If your igloo model frw062 has stopped cooling, there are a few possible reasons why this might be happening:

1. The temperature control could be malfunctioning: If the temperature control is not working properly, it could be causing the refrigerator to run continuously and not cool properly.
2. The condenser coils could be dirty: Over time, the condenser coils can become dirty, which can cause them to overheat and reduce the cooling efficiency of the refrigerator.
3. The compressor could be failing: The compressor is responsible for compressing the refrigerant and pumping it through the system. If the compressor is failing, it may not be able to do its job effectively, which could result in poor cooling performance.
4. The refrigerant could be leaking: If the refrigerant is leaking from the system, the refrigerator will not be able to cool properly.

To fix the issue, you may need to troubleshoot the refrigerator and try to determine the cause of the problem. If you are unable to identify the issue, it may be best to contact a professional for assistance.

If the alarm light on your AEG freezer is still flashing after you have followed the instructions and pressed the button, it may indicate a problem with the freezer. You can try unplugging the freezer and leaving it unplugged for a few minutes, then plugging it back in to see if the alarm light resets. If the alarm light continues to flash, you may need to consult the manual or contact AEG customer service for further assistance.

A flashing red light on a tall freezer indicates that the appliance has detected a temperature alarm, and the temperature inside the freezer has likely dropped below the desired range. A temperature of -6 degrees Celsius is much lower than the recommended temperature for a freezer (-18 degrees Celsius), which can cause frozen food to become damaged or spoiled. To resolve the issue, you should first check the freezer's manual for troubleshooting tips and recommended actions. In general, you may need to adjust the thermostat to a higher temperature, remove any obstructions to airflow, or defrost the freezer if ice buildup is blocking the evaporator coils. If the issue persists, you should contact a qualified technician to diagnose and repair the freezer.

The SUPER button on a Skandiluxe chest freezer is typically used when you need to freeze food quickly, such as when you've just added a large amount of unfrozen food to the freezer. The SUPER function causes the freezer to operate at its coldest temperature for a period of time, which helps to freeze the food more quickly. After the desired amount of time, you can turn off the SUPER function to return the freezer to its normal operating mode.

A loud noise when turning on an Igloo portable ice maker could indicate a problem with the compressor or a malfunctioning fan. It is recommended to unplug the appliance and have it inspected and repaired by a qualified technician.

The defrost timer in a Westinghouse fj383 freezer is typically located at the back of the unit, near the compressor. It may be behind a cover or housing that needs to be removed in order to access the timer. If you're unsure about locating the defrost timer or don't feel comfortable working on your freezer, it's best to consult the user manual or contact a professional technician for assistance.

If the ice machine runs for a while and then gives a water error despite the water pump working and there being plenty of water, it's possible that there's an issue with the water level sensor or control board. It may be necessary to have a professional technician diagnose and repair the machine.

To get the green power light to come on for a Brada mf 183 upright freezer, you should first make sure that the freezer is plugged in and that the outlet is functioning properly. If the outlet is working correctly, try resetting the freezer by unplugging it for several minutes and then plugging it back in. If the fast freeze light is still on, it may indicate an issue with the temperature control or sensor, and it may be necessary to contact a professional for repair or replacement.

yes you can go it

no info generic answer most likely can be fixed ust need to find out what problem is --was one of the electricial components damaged --wire disconnected etc

Question edited for greater clarity. Question moved from 'Power Computers' to Freezers. Disconnect the mains power for 5 minutes to reset the control board. If that doesn't fix it, call for service.

Maybe try calling the factory..... customer service number listed below between the hours of 8:00 AM and 5:00 PM, Monday through Friday, Central Standard Time. Distributed by: Nostalgia Products LLC 1471 Partnership Dr. Green Bay, WI 54304-5685 Customer Service Phone:(833) 258-4210 Web:www.nostalgiaproducts.com

Holy Moly, so few words, so MANY spelling mistakes, all corrected. Question moved from Computers to Freezers category. Don't post email addresses unless you want your email address to get harvested and spammed! This site gets 11 MILLION views a year and is a haven for spammers to collect data! Send it back, it is under warranty. Perhaps you think you were addressing the maker or the seller, but this is Fixya dot com! ..