20 Most Recent Blodgett BC-14G Gas Single Oven Questions & Answers

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter

heatman101

either the flame sense isnt sensing the flame or the heat board is bad.go to the second burner and you will see a probe,clean it up with sandpaper and see what happens let me know

yes it is, advise the salesman that you will stack the new oven with your existing one.

Please go to google search engine.definitely you will get the qnswer.

Door switch, gas valve, temperature control, selector switch?

Once after checking that the specs are the same the parts can be used in different equipment despite the various brands the spec are what is important alone with the dimenssion so that it can fit

You can you have a lot of money.

Dirty burner nozzles is the likely cause.

Model and serial numbers will help

it has been some time since I have done this but if I remember correctly, the replacement glass comes with a special tool for the trim around the glass and instructions. I suggest calling a supplier, such as Restaurant Parts and More, Heritage Parts, or PartsTown and ask if this is still the case that the tool and instructions are included with the glass.

Sorry but question appears incomplete ??

http://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/BL_MT2136_sm.pdf this web site shows your manual and indicates that the issue is the motor needs attention. I would think that the motor has failed mechanically and is "Locked Up." The buzzing is the motor trying to run but can not as it does not move. The SP MTR indicates motor speed issue.

http://www.blodgett.com/wp-content/uploads/BCX14G-serv.pdf Try this website as it has a service manual for this oven. May help you dial in on the issue.