20 Most Recent Dynex DX-UBDB9 Serial Adapter Questions & Answers

Search for "PL2303_Prolific_DriverInstaller_10311.zip" these have worked for me

http://www.bioticaindia.com/dx-ubdb9.html

To change the COM port number assigned to a USB to RS-232 Serial Adapter follow the steps below:

1. Open the Windows Device Manager.
2. Right click on the COM port you want to change.
3. Left click on Properties.
4. Click on the Port Settings tab.
5. Click on the Advanced... button.
6. Use the drop down list to select the COM port number you want to use.
7. Click OK.
8. Click on OK again and close Device Manager

You should mention what kind and model is your cable coz there are so many types.

Try downloading the driver from here.

check the Dynex website and see if there is any special driver necessary to work under a 64-bit OS

If you follow the address below, it will get you to the dynex website. typr the model in the search and you will be directed to the download area.

www.dynexproducts.com/t-drivers.aspx

Hope this helps

Hi,
So you mean to you cannot find the drivers for this device to work. I guess you wrote hardware instead.
http://www.dynexproducts.com/pc-197-2-dynex-16-usb-pdaserial-adapter-cable.aspx

You can click on the above link, and click on the button chat now , and the support tech from dynex would give you the required help.


Thanks
Proton

OK IF YOU HAVE A MAC THE DISC HAS YOUR DRIVERS IT SHOULD AUTO LOAD OR TELL IT TO INSTALL FROM DISC.WINDOWS DOES NOT NEED IT(THE DISK)JUST HOOK UP AND USE.RICHARDM69

Unfortunately, Dynex no longer provides driver updates for their 1.3MP webcam on Windows 7 as the product has reached its end of life and is no longer supported. However, you may still be able to use the webcam with the existing drivers that came with it or with the generic drivers that are built into Windows 7. To check if your webcam is recognized by Windows 7, follow these steps:

1. Plug in your Dynex 1.3MP webcam to your computer's USB port.
2. Click on the "Start" menu and select "Control Panel".
3. Click on "Hardware and Sound" and then select "Device Manager".
4. Look for the Dynex webcam under the "Imaging devices" or "Cameras" category. If it is listed, then your webcam is recognized by Windows 7.

If your webcam is not recognized by Windows 7 or is not functioning properly, you may want to try downloading and installing a third-party driver update software like Driver Booster or Driver Easy. These programs scan your computer for outdated or missing drivers and automatically download and install the latest versions for you. Alternatively, you can try searching for a compatible driver on third-party driver download sites, but be cautious as some of these sites may contain malicious software. It is always recommended to download drivers from the manufacturer's website or from trusted sources.

Hi Jim, Some psu manufactures put a plastic sleeve over high voltage components as a safety measure. Is the piece you have flat or tubular?

Plug the keyboard into another device and if it works, then your Chrome laptop is at fault. If the keyboard does not work in a different device, toss it and buy another one, unless it's new, then take it back to the store where you bought it.

This sounds like you need a smartcard or your current smartcard is not working anymore. Your local provider probably "scrambles" the service over the line and you need to buy a certain subscription to see this channel. Please get in contact with your cable provider.

go the the manufacturers web sit for the make and model of the mouse download the driver compatible with your operating system , and run also you can go to control panel select the mouse section and check for compatibility in properties section it is there that you can alter mouse speed , clicks , scrolling and the like