20 Most Recent
Atwood Mobile Products Atwood Water Heater Ignition Control Module Circuit Board 93865 - 93865 - Page 2 Questions & Answers
Honeywell WV8840B1109 temp control valve on water
You can reset the code by turning Gage all the way up highest setting count to ten turn it to hot could to ten then turn to pilot count to ten and then turn it to desired temp burner should come on. Saves lots of money and time
Need a manual for drayton tempus 3 heating control
I've ended up with a Drayton Tempus 3 when I bought my house, and I think this is how it works. It allows you to set 2 Timers (I'll call them timer 1 and timer 2) so that you can control Hot Water or Heating On/Off times twice a day. The unit has 6 buttons - 2 for Adjustment, 2 for Hot Water and 2 for Heating. The 2 Adjustment buttons allow you adjust the Clock Time, or allow you to adjust Timer 1 and/or Timer 2. NOTE: Timer 1 is the time refered to on the Heating / Hot Water Select buttons if you press "Once". If you select "Twice" on these the both Timer 1 and Timer 2 are taken into account. For example if you want Hot Water to come on Once between 8pm -10pm, but you want Heating to come on Twice between 6am - 7am, and 8pm -10pm, you have to do the following: Set Timer 1 to 8pm - 10pm, and set Timer 2 to 6am -7pm. Then select Once for Hot Water, and select Twice for Heating. Hope this helps.
Pipe repair and not only in Toronto
Hi. Very cool requirement you actually have. There is nothing that the experts at this plumbing site in Canada can't do . They have been providing friendly service to commercial customers in Canada for over 20 years. I hope you find my recommendation helpful.
Why is the gas not going to the burner?
'make model (what it is)' in all question please Rick.
All of the gas passageways in a fridge are very small. If you removed the gas valve and associated pipes, it takes a long time for the gas to bleed through and get from the gas line to the pilot light and that is needed to heat the thermocouple and allow the gas valve to open.
It should also be mentioned that all work on Gas appliances should be undertaken by a qualified and registered gas technician.
My pilot light control switch will not return to Off or pilot it is stuck in the On position.
Question edited for funky spelling of 'pilot', (piolt light)..You posted to the Cars and Trucks category, what year make and model is it? :>DThis sounds like some type of gas appliance, stove, fire or central heating furnace? It is gas and can only be worked on by a registered gas service technician.'make model (what is is)' in all question of this type please.'year make model' in all vehicle questions please.
Is AGA somehow connected to combi boiler
Some combi boilers have a 'Keep Warm' function. Check to see if your combi has this feature. This is a function where the system preheats an amount of hot water to provide instant hot water when you turn on the tap/faucet. To do this the combi will start up when it detects the stored water is below a certain temperature to reheat it ready for use. This can be turned off if you prefer not to use it.
Not finding what you are looking for?