20 Most Recent Digidesign MBox 2 Mini (USB, includes ProTools LE software) 9900-55898-00 Volume License for PC, Mac Questions & Answers

You do not need the card, all you need is the receipt for the product or a copy of the charge if a credit card was used to make the purchase. Not having the registration card DOES NOT void the warranty. If you wish a replacement card you must contact the customer service department of the manufacturer of this tool.. Fixya.com is just a technical advice service and have no connection to Pro Tools.

Digidesign MBox... | Answered on Jun 26, 2011

Then, you need to buy a code; or contact the manufacturer.

Digidesign MBox... | Answered on Jan 29, 2011

100% raidiation problem!
it was wid my denon protech also,
see if earthing is correct for all gears,
try keeping an equidistance of 10"inches between each gadets

Digidesign MBox... | Answered on Mar 13, 2010

have you tried Cs updates to your protools software? find the correct one for you by searching Cs updates at digidesign.com sometimes if you update you software, the firmware of your interface gets updated. Hope that helps.

Digidesign MBox... | Answered on Sep 09, 2009

Have you tried it plugged into another computer, just to see if it gets power? If it quit working and it hasn't been too long, you may be able to get it replaced for free where you bought it or from digidesign (digidesign.com)

Digidesign MBox... | Answered on Sep 09, 2009

Is there something plugged into your inputs, and are the pre amp channels turned all the way down? Also is your 48V phantom power turned off? To prevent damage to diaphragm or electronics of condenser microphones, the phantom power should be left turned off and only turned on after a mic is plugged in and the pre amp turned off and track unnarmed to prevent damage to speakers.

Digidesign MBox... | Answered on Sep 09, 2009


Digidesign... | Answered on Nov 04, 2013


Few symptoms that your firewire is not working would be that the FireWire devices would intermittently drop off the bus. Another symptom was the Mac telling you that you had disconnected a FW drive (when you had not). Sometimes the problem manifested itself within the first two minutes of use; other times after 40 minutes. It first happened after the 10.2.6 update so you would be trying to get reinstalled the Combo updater (no improvement), and then after you did a clean install on another drive with 10.2.4 (same problems). Booting into single-user mode, you will see the following message appearing (all on one line):

IOFireWireSBP2Login::fetchAgentWriteComplete fetch
agent write failed! Retrying

It would repeat five or six times, then pause about a minute, and then repeat again, etc. Sometimes it would appear within the first minute after boot and other times it would take 30-40 minutes until it would appear - the same frequency the problems would develop when booted to the Finder. Suspecting a bad FW port (the lower port on the motherboard), I swapped the FW devices to the upper port...and the problem disappeared.

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Digidesign... | Answered on Jul 25, 2010

Yes you do need to have a drivers license in order to be allowed to drive an electric car. Electric cars are still vehicles too.

Computers &... | Answered 20 hours ago

Not finding what you are looking for?
Digidesign MBox 2 Mini (USB, includes ProTools LE software) 9900-55898-00 Volume License for PC, Mac Logo

Popular Tags

32 questions posted

Ask a Question

Usually answered in minutes!

Top Digidesign Computers & Internet Experts


Level 3 Expert

85239 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 3 Expert

1618 Answers

Are you a Digidesign Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Digidesign Computers & Internet

  • Digidesign Computers & Internet

Most Popular Question

m box 2 mini not found

  • Computers & Internet