20 Most Recent DCS WO-230 Stainless Steel Electric Double Oven - Page 2 Questions & Answers

hi glen... if the front right burner clicks all the time you will have to replace the ignitor. IF the oven door won't close, check the hinge side to see if there is debris there. If the door is sprung it will have to be replaced. Joe

Thanks for choosing Fixya!

You can get a spring from Airedale Springs - Telephone - 0845 4754201

Alright, generally this is a sign of the temperature sensor being bad as the broil coil will still work even if the sensor is bad but we can also test the coils. To test the sensor and coils, you need to pull the oven out and remove the back panel. Make sure to unplug the oven. The sensor can be seen inside the oven. It looks like a small thin rod towards the back top of the oven (about 6 inches long). Disconnect both the rod and the element wiring connectors at the back of the oven. Using an ohm meter (you can purchase one cheaply at any electronics store), you can measure the resistance at the terminals of both the sensor and the elements. The sensor resistance should read about 1000 ohms and the elements about 20 ohms at room temperature. If either one is extremely high or infinite, then it is bad and needs to be replaced. Let me know how this works out for you. Benjamin

If the fan is not working you need a new fan, if the fan is working but there is no heat you need a new heating element.