20 Most Recent
Questions & Answers
You need to enter the code or the Cd that you chose to be your key. The unit is security locked.
on Nov 15, 2016
I HAVE A ECLIPSE CD 3402 IT was working but i had to dicunect the baterie and it says call 1800 what can i do
on Nov 08, 2013
Hi and thank you for using fixya:
The first thing you need to check if the audio cable that goes from the back of the cd player to the speakers, if that checks out ok, then check the fuse on the radio inside.
on Feb 16, 2012
call an eclipse dealer. they will unlock i think the charge is $35
on Oct 21, 2011
This main unit is equipped with ESN (ECLIPSE Security Network). A music CD (Key CD) which has been registered in the main unit, is necessary for ESN. Without it, none of the functions will operate, even when the battery is reconnected after it has been disconnected for maintenance, or the ignition switch is turned to ACC or ON after it has been turned to OFF. ESN can be set or cancelled using any of the following methods:
on Sep 28, 2011
This was taken from a radio similar to yours. Same brand but different model. Hopefully it'll help.
(Also the "SEL" button it talks about is a big round button/knob on the right of the unit.)
Setting the Time
This receiver uses the 12-hour display notation.
1 Turn [SEL] button to select CLOCK ADJ.
2 Press the [SEL] button.
The clock adjustment mode is activated.
3 Turn [SEL] button to display the item to be selected for
Hours, minutes or exact hour will be switched each time the
button is turned.
4 Press the [SEEK / FAST] button.
[SEEK] button: Turns the time forward.
[FAST] button: Turns the time back.
To set the clock to 0 minutes, 0 seconds (an exact hour),
press the [SEEK / FAST] button.
At 3:29: Pressing the [SEEK / FAST] button returns to 3:00.
At 3:30: Pressing the [SEEK / FAST] button advances to 4:00.
5 Press the [RTN] button.
At this time, other adjustments can also be made in
6 Press the [FUNC] button to exit Function Mode.
on Mar 02, 2011
hi, you can call the service center at 1-800-233-2216....they will charge $25 to assist in removing the code. this worked for my friend's unit.
on Feb 21, 2011
Not finding what you are looking for?