20 Most Recent Rheem RQPMA037JK R410A All-in-One Package Unit Heat Pump - Page 5 Questions & Answers

I did a google search and found only one link (below). I don't know if it is a con or a genuine manual.

In the absence of a dedicated manual you will have little choice but to gather information of a more generic type and apply it to your air-con. I expect most of them use the same working principle and similar component arrangement.


Heating &... | Answered on Nov 26, 2020

I would like to know this too. I think it is a 2 1/2 ton. But not sure.

Heating &... | Answered on Nov 26, 2020

Hp= heatpump

Heating &... | Answered on Nov 26, 2020

air conditioners or heaters whats the difference really?? wear a mask if you are worried about it

Heating &... | Answered on Nov 25, 2020


Heating &... | Answered on Nov 25, 2020

sorry but we know nothing about Dunkirk boilers contact a local plumbing heating company

Heating &... | Answered on Nov 25, 2020

Something must be stopping the gas flow to the burners - blocked jets, blockage in the line, thermostat or safety thermocouple.

Thermocouple is probably the most common heater failure though in a conventional design usually when it fails the pilot will light but not remain lit.
Knowing the thermostat is electrically ok doesn't mean it is allowing a flow of gas when it is supposed to but again much depends on the design. With an electrical/electronic system the thermostat will probably switch an electrical supply to a solenoid valve controlling the gas flow. A continuity check with an ohmmeter is only a prelude to measuring the voltage/current flow and that is only a prelude to ensuring the presence of a supply actually switches on the gas flow...

Heating &... | Answered on Nov 25, 2020

Please check out this link: https://www.google.com/search?source=hp&ei=NUC-X-vFAcGV_Qbt-oqgDQ&q=LRA+195+in+tonnage&oq=LRA+195+in+tonnage&gs_lcp=CgZwc3ktYWIQA1DIDFjIDGCWE2gAcAB4AIABzQKIAe0EkgEFMi0xLjGYAQCgAQKgAQGqAQdnd3Mtd2l6sAEA&sclient=psy-ab&ved=0ahUKEwirtOT5y53tAhXBSt8KHW29AtQQ4dUDCAc&uact=5

Heating &... | Answered on Nov 24, 2020

Check all electrical connections at board check any moles plugs pins etc. if you have power going to board and no status light sounds like a bad board......

Heating &... | Answered on Nov 22, 2020

id suspect the thermocouple in the pilot flame is bad orrrr the gas valve itself. your call

Heating &... | Answered on Nov 21, 2020

Zamil a.c. EC error code show what is problem

Heating &... | Answered on Nov 20, 2020

Same problem, but now it is ok.  I emailed Sunbeam and was told that if my blanket was not plugged directly into a wall outlet it was not getting enough power and I needed to plug it into a wall outlet taking these steps:
1) Unplug from the surge protector/extension cord 2) Unplug from the blanket 3) Plug back into the blanket 4) Plug into a wall outlet

Heating &... | Answered on Nov 19, 2020

Not finding what you are looking for?
Rheem RQPMA037JK R410A All-in-One Package Unit Heat Pump Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Rheem Heating & Cooling Experts

Lawrence Oravetz

Level 3 Expert

10548 Answers

ray gallant

Level 3 Expert

70787 Answers

 Russ Hill
Russ Hill

Level 3 Expert

4057 Answers

Are you a Rheem Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rheem Heating & Cooling

  • Rheem Heating & Cooling

Most Popular Question

btu capacity ahr42c3xh21b

  • Heating & Cooling