20 Most Recent
Craftsman Shop Vac 8 Gallon Replacement Filter - Page 2 Questions & Answers
I don't want to pay to find out out to use my
Hi, W/D here.
Every so often, people get a bit twisted up about this website, thinking that they have to pay for advise. What it is, is, those things are options, but if you just want to just throw out your question and wait for a response, it's free. And, here we are.
Go to http//www.searspartsdirect.com and enter your model number. This site will have exploded diagrams and parts lists for your vacuum, and will probably have a button link to your manual that you can download (for free!). Enjoy. Thanks for using FixYa, where folks really try to help!
Best regards, --W/D--
4/2/2011 2:22:57 AM •
Craftsman...
•
Answered
on Apr 02, 2011
I am renting a house
Try jerking the emergency cord the oppisite way to put it back in gear and the door must be up all the way open
3/15/2011 1:29:34 AM •
Craftsman...
•
Answered
on Mar 15, 2011
Snowblower when running it backfires
THE MOST LOGICAL CAUSE IS THE CARBURATOR NEEDS REBUILT. IT IS DIRTY AND RESTRICTING FUEL AND AIR FLOW. HAVE A GOOD DAY! it may even be as simple as a new spark plug. try turning the fuel adjustment on carb, all the way in and back it out 1-1/2 turns. the idle screw should be screwed all the way in and backed out 1 turn. if it has a screw on bottom of float bowl or carb, it is the high speed jet, try adjusting it, in or out.
11/27/2010 2:30:10 AM •
Craftsman...
•
Answered
on Nov 27, 2010
I have a Craftman 5hp
This sounds like the carburetor needs disassembled and cleaned. This happens over time and the tiny orifices plug up. Usually from letting gas set in them for extended periods of time and it gums up. If you are not familiar with them, I would take it to your nearest small engine repair shop.
1/10/2010 2:05:58 AM •
Craftsman...
•
Answered
on Jan 10, 2010
Trying to remove motor from wet-dry
Hi Dan:
I am not familiar with this model but some of the consumer wet vac models are build with a module and motor as one part. You will need to replace the entire module
8/8/2009 1:58:00 PM •
Craftsman...
•
Answered
on Aug 08, 2009
How do i fix a vacuum line hose on a car that's been cut?
Alot depends on the type of hose. There are plastic hoses and rubber hoses. Generally you can use a smaller plastic connector to connect two rubber hoses together and visa versa, Make sure it is a snug fix. You could also use an adhesive to keep it together.
3/31/2024 3:39:13 PM •
Vacuums
•
Answered
on Mar 31, 2024
How to empty a etl vc-h3301 vacuum cleaner
How to open it to see if the fuse is blown. I removed the three screws I saw. I feel that there is another which prevents me from opening it in two. I looked under the tights, I removed the plate where the two buttons are located. I can't open it.
3/21/2024 4:57:04 PM •
Vacuums
•
Answered
on Mar 21, 2024
Not finding what you are looking for?