20 Most Recent Dirt Devil UD40270RM Quick Power Compact Bagless Upright Vacuum Refurbished,Lightweight,Fold Down Handle,HEPAFiltration,5 Position Height Adjustment - Page 2 Questions & Answers


Sure, take the machine apart. Cut off the bad part of wire. Strip insulation to same as what's inside. Remove old original & wire in the new.

Dirt Devil... | Answered on Jul 01, 2019


I know of no "resart button"

Dirt Devil... | Answered on May 07, 2019


One of two conditions: The Charger is not functioning or Battery has become a dud.

Dirt Devil... | Answered on Apr 11, 2019


You didnt specify the model number, so I'll limit my answer to most common.

On most upright vacs, you disconnect the hose running to the floor pickup and attach the crevice tool (or whatever else you have) to the end of this hose. You then continue cleaning with the hose end atrachment.

I would imaging the Dirt Devil Edge Wedge is similar.

Dirt Devil... | Answered on Apr 06, 2019


It sounds like there is a clog in the hose itself if you have no suction from the end. If it is bagless remove the canister from the machine or if it is a bagged machine remove the bag. If you have a shop vac attach the hose from the shop vac to the end of the hose of the dirt devil and try to suck the obstruction out that way. Sometimes it is possible to remove the clog this way. You can tell if you have suction from the debris port to the bag or the canister. If not you may need to use a snake or coat hanger to pull the clog through.

Dirt Devil... | Answered on Mar 15, 2019


Hi Kathy,

Click this you tube tutorial to see how they open the vacuum with the same model that you are looking for.

https://www.youtube.com/watch?v=yG29klTuWxc

Dirt Devil... | Answered on Mar 12, 2019


Yes, but Instead of the dirt and gunk getting trapped in your filters it will get sucked into your motor which will quickly ruin it.

Dirt Devil... | Answered on Feb 24, 2019


Hi there, a few different solutions....
flip it over and remove the screws, take a piece of paper and draw a diagram of how the screws are placed. place the screws on the paper as they were in the vacuum. remove any screws needed to free the brush, remove trash and her from the brush- scissors will help a bit- put it back together and give it a try, the other solution it to check the motor that spins the brush it may be dealt driven or gear driven or a direct drive- I don't wanna tell you more because you are a consumer and dirt devil did not want you taking it apart because its unsafe if your not sure what your doing and id feel bad if something happen to you..
https://www.6ya.com/mr.mike

Dirt Devil... | Answered on Jan 31, 2019


sometimes vacs get to old ,, you can find the same model or purchase a new one here>>>www.discountbargainprices.com

Dirt Devil... | Answered on Jan 04, 2019

Not finding what you are looking for?
Dirt Devil UD40270RM Quick Power Compact Bagless Upright Vacuum Refurbished,Lightweight,Fold Down Handle,HEPAFiltration,5 Position Height Adjustment Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Dirt Devil Vacuums Experts

Tim Venetis

Level 2 Expert

260 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

Randy Schumann
Randy Schumann

Level 2 Expert

410 Answers

Are you a Dirt Devil Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dirt Devil Vacuums

  • Dirt Devil Vacuums

Most Popular Question

fix vacuum brush will not spin

  • Vacuums
Loading...