Top 20 Electrolux Epic 6500 / 7000 legacy vacuum hose grey Questions & Answers

There's a "tab" at the top rear of the vacuum that must be depressed while pulling up on the filter cover. You can then access the filter for easy changing. With 30 yrs. experience, I have a legitimate store front business and do service by mail at a reasonable cost if interested. Hope that helps! Mick

Question edited for full 'make model (what it is)'. Question moved from Washing Machines.

Trilobite error 18 Battery Fault?

RobotReviews http://www.robotreviews.com > chat > viewtopic May 25, 2011 - I suspect it happens when a discharged battery is very weak, and may be because the 15 sub-C NiMh cells of one battery are dis-equilibrated.

Messages D'erreurs; Fehlermeldungen - Electrolux ...

ManualsLib https://www.manualslib.com > ... > Overview manual Electrolux Trilobite Manual Online: error messages, Messages D ... our Customer Service, see page 18. The errors you can correct yourself are.

Trilobite error 18

Fixya https://www.fixya.com > ... > Trilobite Vacuum Sep 7, 2009 - Trilobite error 18 I looks like charging problem. Could you please give advice by myself. - Electrolux Trilobite Vacuum question. ..

This will happen if the bags are either incorrectly fitted or are non genuine bags that are not within the tollerance, size wise, for the machine.

See position of switch in the manual. It may possible, mains wires are sort that is by passing switch. Use Of Standard Attachments; Operation - Electrolux 2100 Instructions Manual [Page 6] ' ManualsLib

1. Start by removing the screws that secure the bottom plate of your vacuum. 2. Once the bottom plate is removed, you will find the belt inside, as well as the belt pulley and drive wheels. 3. Disconnect the belt from the belt pulley. 4. Align the new belt over the belt pulley and drive wheels so that the teeth of the belt match up with the grooves on the pulley. 5. Wrap the belt around the pulley and drive wheels, and then reattach the belt to the pulley with the supplied clips. 6. Reassemble the vacuum and you're done!

Sorry for the delay. https://www.google.com/search?q=Electrolux+1623+motor+wiring ..

possible motor failing [bearings] --fan damaged

Help here. It says a clog or the valve that senses airflow and tells the motor to cut out to protect itself. https://www.google.com/search?q=Electrolux+legacy+runs+without+the+bag+but+shuts+down+as+soon+as+the+bag+is+inserted ..

Yes, that is probably overheat protection on the motor. Probably worth fixing, although some of the reviews are not good and mention poor quality. https://www.google.com/search?q=Electrolux+oxy3+vacuum+works+for+2+seconds%2C+cuts+out ..

Hi, Please check that all of your belts are still good (ie not stretched out, torn or otherwise worn). Also, please double check that you've cleaned all debris from the brush roll. You might need a tooth brush or a comb that you can throw out later. You might use shampoo to clean in. Then , please have the brush roll motor checked. Thank you.

You may be able to find a rocker for the on/off switch of your Electrolux Silverado 1505 vacuum at an Electrolux dealer or an authorized repair center. You may also be able to purchase a replacement rocker online from an retailer that specializes in vacuum parts and accessories. Here are a few suggestions for finding a replacement rocker:

1. Search online for the make and model of your vacuum, along with the words "replacement rocker" or "on/off switch rocker." You may be able to find a compatible rocker from an online retailer that specializes in vacuum parts and accessories.
2. Check the manufacturer's website. You may be able to purchase a replacement rocker directly from Electrolux or find a list of authorized dealers or repair centers where you can purchase one.
3. Contact the manufacturer directly. You may be able to request a replacement rocker from Electrolux's customer service department or find a list of authorized dealers or repair centers where you can purchase one.

Hi, Please remove some of the weight of your clothes. The dryer might be working too hard and then overload. So a lighter loads stops the overload. Also, please make sure that you've removed all of the lint from previous cycles. Thank you.

You may be able to find a manual for your Electrolux PowerPlus Z4471 cylinder vacuum cleaner online or by contacting Electrolux directly. Here are a few suggestions for finding a manual:

1. Search online for the make and model of your vacuum, along with the word "manual." You may be able to find a downloadable PDF of the manual or purchase a physical copy from a third-party seller.
2. Check the manufacturer's website. Many manufacturers make manuals available for download or purchase on their websites.
3. Contact the manufacturer directly. You may be able to request a copy of the manual from the manufacturer's customer service department.

sounds like a clog /debris blocking brush from turning and belt slipping

I can't find a pares schematic for it. We are in North America and Google leads me to believe it is a model for New Zealand? Go to where you bought the motor and see if it lists a Thermal Fuse? https://www.google.com/search?q=Electrolux+UltraSilencer+ZUS3962%2C+parts ..

check for clog --bag damage

improper connection of bag

Either the belt shredded or a thermal overload fuse has blown. Find a local vacuum place and take it in. Model details https://www.vacuumland.org/cgi-bin/TD/TD-VIEWTHREADM.cgi?38214_22 https://www.google.com/search?q=electrolux+%28ultralux+driclean%29 ..

check hose for clog