how do I set time etc on a coleman sports watch, have manual but doesn't make sense, it's model 40-408
Posted by gwplusrw on
The watch has four buttons. The lower left button is labeled MODE on the face of the watch. There are four modes and pressing the MODE button will step through each mode until you return to the mode at the start of the process. Start at the "Normal" timekeeping mode and press the "MODE" button three times until the digital display rightmost two figures for seconds flash.
Press the lower right button labeled RESET until the item you want to change is flashing. Pressing RESET cycles through seconds, minutes, hours, day, month, day of the week in the top sub-dial and then back to seconds again.
When the item you want to change is flashing press the top right button labeled START to step the displayed item to the value you want. When you are satisfied all the settings are correct, press the lower left button marked MODE to return to normal operation.
Coleman 40-408 User's Guide
Posted on Nov 12, 2010
The instructions that came with my watch only shows how to get to the area needed to make the change of date and time but it does not tell you how to make the changes once you are there.
Posted by gary417 on
The instructions are generic for a watch with analog controls, besides they mention how to set the time but not how to activate and deactivate the alarm.
Most digital watches have you press one or two buttons at once to activate/deactivate the alarm. I've tried all the combinations of pressing one then another button, one button on it's own, and two buttons.
normally a symbol, a dot or a image of an alarm bell, etc. will light up to show the alarm is activated and when you deactivate the alarm it will dissapear.
Posted by rinkycrap on
Start with watch in normal clock mode. press and hold bottom right "lap reset" - alarm time appears. Keeping "lap reset" held, I can then toggle the alarm on and off using top right "start/stop".
Qiu: Circle segment lights up (only a black point in the middle, NO ALARM)
Circle segment with a black section on the above middle point, ALARM ON.
Posted on Aug 23, 2009
Armitron WR165 How can I turn the alarm off
Posted by rob1929 on
Assume: A C
While holding A, press C. This toggles the hourly chime and alarm on/off.
Posted on Apr 21, 2009
adjust the band on my merona watch
Posted by jkeiningh2... on
at the back side of bracelet you can find direction mark, use fine and strong pin with tiny hammer to remove pin out. if there no mark , just look at both side of bracelet, thru narrow hole push your pin, then fastening pin come out thru wider hole
Posted on Feb 23, 2010
just bought a roxy digital watch for my daughter however the instructions were for a analogue watch. Any help for setting time and date please.
Posted by hootsmail on
I found users instructions on roxy website at:
We were able to program our watch completely!!!
If you look on the back of the watch that you bought on the metal plate, it tells you the style. Ours was the Roxy 70's digital watch, and I found specific instructions at (even if this is not your style, the instructions may work):
Posted on Dec 23, 2008
need a manual/ instructions for auriol 2-LD2970-4 radio controlled watch
Posted by johnelvism... on
Posted on Jan 27, 2011
Needs correct time set, also date.
Posted by ajbowman06 on
Copy and paste this link. It will take you to Bulova's service centerwhere you can download instructions for any of their watches.
If you appreciate me finding this answer for you then please rank this solution as "fixya" or at least "helpful" as what I have found for you will solve your problem. :-)
Posted on Jan 14, 2009
How to set Seiko alarm chronograph alarm?
Posted by guy5880 on
Without the watch model it is hard to help you set the watch. Some Seiko watches use the watch stem which has two positions. Sometimes it is hard to identify the indentations so you may want to pull the stem all the way out then carefully push the stem to the first indentation. This will activate the alarm until it is pushed all the way in. When it is in the alarm on position, you can use the buttons to set the alarm time. However, I have 10 Seiko watches, and they are all unique to their functions, so it is best that you go to the link below and put the caliber code from the case back and look at the instructions.
Posted on Feb 24, 2010
Need instructions on how to set an XINJIA Sports watch
Posted by wellie101 on
Hi need to get a date change although I have the instructions it's all about the buttons that's it sooooooo please help me plus I need to stop it from beeping every hour
Posted on Jun 08, 2014
1,052 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: