Stoves 720EF Electric Double Oven - Answered Questions & Fixed issues

should be able to have on manual as for normal cooking

Stoves 720EF... | Answered on Dec 26, 2019 | 746 views

Hello, Kimquy25 - is not a website for scheduling a Sears technician to inspect your gas stove.

Since you live in Houston, Texas, see the information here:

Personal opinion: If you can avoid it, do not use your gas stove / oven until a repair person checks it. Also, if you think there is a gas leak, IMMEDIATELY LEAVE YOUR HOME, go to a safe location and call the CenterPoint Energy natural gas Leak Emergency Hotline: 888-876-5786. - See more at:

Best wishes.

Stoves 720EF... | Answered on Dec 19, 2017 | 61 views

Join the orange to the red wire, and then join the brown to the white wire. I have done that and everything is working perfectly (except of course the pre-programming which the clock would do).

Stoves 720EF... | Answered on Jul 19, 2016 | 162 views

You must remove the cabinet from around the ovens to access the parts.

Stoves 720EF... | Answered on Jul 18, 2016 | 155 views

sorry no idea as we do not know where you live but they usually will know where ever they sell your make and model

Stoves 720EF... | Answered on Dec 20, 2015 | 85 views

Check with a local appliance parts distributor and/or the manufacturer/distributor of your oven.

Stoves 720EF... | Answered on Sep 18, 2015 | 99 views

The timer IC oscillator is not working, you my need to replace the board.

Stoves 720EF... | Answered on Jun 24, 2015 | 92 views

I can only speak for the 720. If you want a circuit/wiring diagram for this one, then I need an email address. I will then register this on my BT Digital Vault and you can the download the whole manual.
Looking at the diagrams, the neon for the main oven has white and black wires.
The white wire from the main oven neon goes onto the same connector on the thermostat block as the white wire to the oven element. The black wire from the neon goes to a common terminal on the top oven neon, which then goes onto P6 of the top oven switch (still black wire).
If you need any more info, then let me know.

Stoves 720EF... | Answered on Feb 25, 2015 | 593 views

Hi, for the top oven:
Actual capacity 39 litres, Usable capacity 35 litres.

for bottom oven:
Actual capacity 59 litres, Usable capacity 50 litres.

Stoves 720EF... | Answered on Jan 17, 2015 | 250 views


Stoves 720EF... | Answered on Jan 05, 2015 | 174 views


Stoves 720EF... | Answered on Jan 05, 2015 | 169 views

Yes you can, your best bet. Try to go to manufacture of your stove.
If they discontinued then try the web

Stoves 720EF... | Answered on Jan 03, 2015 | 85 views

I would suggest the wrong wires were cut off and joined. If the ground wire touches the power wire a fuse or circuit breaker will blow.. Before you do anything more make sure the curcuit breaker is not blown. If it is reset it and turn the cooker back on. If the breaker blows again then it is wired wrong.

Stoves 720EF... | Answered on Dec 16, 2014 | 594 views

Try taking the power wire that goes into the timer and the power wire that comes out of the timer and put them together not hooked to the timer and that should work. If that works you should solder them together and electrical tape them good.
Make sure the power is off when you do this so you don't cook yourself.

Stoves 720EF... | Answered on Dec 15, 2014 | 928 views

It is very possible the control board is going bad. Before replaceing the control board pull the connectors and reinstall them. There could be a bad connection causing the display not to lioght up completly. If that doesn't work then it looks like control board time.

Stoves 720EF... | Answered on Nov 27, 2014 | 112 views

Look for any burned or discoloration on the bottom bake element. Did you try the broil on the lower oven? If neither is working you may have a board or touchpad issue.

Stoves 720EF... | Answered on Nov 26, 2014 | 103 views

I don't think that the lights are repairable,it looks to me that they are part of the timer display and if this is the case it would not really be a diy job.

Stoves 720EF... | Answered on Nov 18, 2014 | 87 views

When you replaced the burnt out selector did you notice any other damage? The selector switch may be connected to the energy input control. Most circuits have some sort of control, allowing only the right amount of energy to be put in. If this got damaged, the fuse would be inconsistent.

Elisa Jed '

Stoves 720EF... | Answered on Aug 28, 2014 | 90 views

Ask the internet, or contact the manufacturer.

Stoves 720EF... | Answered on Aug 19, 2014 | 73 views

Not finding what you are looking for?
Stoves 720EF Electric Double Oven Logo

471 questions posted

Ask a Question

Usually answered in minutes!

Top Stoves Ovens Experts


Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Are you a Stoves Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides