LG GSA-T20N DVD±RW Dual Layer Burner - Page 6 - Answered Questions & Fixed issues

https://www.lg.com/us/mobile-phones/VS415PP/Userguide/018.html

go into settings and change the region. but some DVD players will not let you change the region. but some will. just change the region to 1

go to input and click the one you hooked up the cable to

Hi, Is the network invisible on both 2.4g and 5g on your device?

Sounds like there was an accidental change to the brightness control. Try unplugging the TV overnight and see if it will reset to factory setup. If that doesn't work use your flashlight to see if you can get to the menu page for brightness and then move the control to the middle-- it will bring up the brightness. Also, you can try to find the menu item to reset all controls to the factory settings. Look in your manual or find the manual on-line.

Hi, that message indicates that your video source is providing an unsupported video resolution , please check in settings that video output resolution is no more than 1920 x 1080 @ 60Hz. Also remember to verify that HDMI is selected as input source at monitor.

DVD REGION FREE & BLUE-RAY REGION FREE To change the Region code on your DVD player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region. You can enter a new region and it also shows you how many changes have been made. NOTE you can make only 4 changes and the player will lock permanently on the 4th change. If you want to play DVDs from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the player will be a piece of junk. The best solution to make the player region free is to install a piece of software (Passkey for DVD) that allows you to play DVDs from any region and Passkey for Blu-ray that allows you to play Blu-rays from any region. There are several available on the Internet but my favourite is DVD-Region Free From: - www.dvdfab.com/products,free.htm

On another device make sure you are signed in. Double check passwords.

you try different outputs? Did you try to unplug your set and leave it unplugged for about 15 minutes and then plug it back in? You checked your menu to ensure all settings are properly set? What have you tried?

Details, please.

This could be an issue with the main mother board or T-con. Kindly let me know how this goes or better still ask here Ask question Electronics questions answered

Do a factory reset. This will let you start over. Device resets LG V30 V30

Hi, The OS upgrade is controlled by the phone manufacturer. You can look through LG's website to see if they plan any upgrades.

Use a wireless extender. Then from the back of the extender use Ethernet to plug to your player. Better still, plug it into a switch and then you can use the switch to connect multiple devices using Ethernet which is much faster than the built in wifi.

fix/repair/extend battery of HBS-730/750/700 very easy and simple wa https://www.youtube.com/watch?v=qLwpemHhLRc

If you have to face a problem with your Gmail Account call us at our toll-free number 1833-284-2444. Visit :- https://gmailsupportus.com/gmail-support-phone-number.html

Hi, You need to go into the menu on the TV and adjust the screensaver/timeout settings. Here is a link to the manual - https://www.lg.com/us/support-product/lg-55LN5710

http://www.keyboardshop.in/keyboard-express-p.php/1+LG+RD400+laptop-battery

Hi way to much info to load here check out lg page 4 more information...cheers

i hope this helps 1 ) Try hard reseting the device - Turn the phone off -Press and hold the Power/Lock key and the Down Volume key at the same time -The Factory data reset screen will appear -Use the Volume keys to highlight Factory data reset, then press the Power/Lock key to confirm. -Highlight Yes, then press the Power/Lock key to confirm If this fails. Try flashing the phone or take it to an expert