20 Most Recent LG GSA-T20N DVD±RW Dual Layer Burner - Page 2 Questions & Answers


Hello there jpd0490.

Here's your geek-steer ...

There are principally two chief causes for this type (calibration) of burn failure:
  1. Inadequate quality media (disks). Verbatim is always a solid choice. However, more important than the brand-name disks are sold under, is the actual manufacturer. You can determine this with the aid of a little software tool called "DVD Identifier". There is an entire sub-culture devoted to tracking the best media available, right down to the manufacturing lot level.
  2. Drive failing. Since you say that it works consistently otherwise, this option is unlikely.
Good luck, and please do post back ...
  • to let me (and interested others) know how things worked out,
  • to provide clarification or feedback,
  • if you have ANY further questions.
"Today's the best day of my life ... and NOW you're part of it!"
Via-con-Dios and Godspeed -- Geekinator (aka Craig).

LG GSA-T20N... | Answered on Oct 10, 2009


how long have you been using your dvd? if this is the first time you encounter the problem for a long time..your dvd burner might be damaged..better replace it...hope this helps

LG GSA-T20N... | Answered on Aug 31, 2009


Check inside the CPU if it is connected properly.
Due to this problem there are some reason why it can't be detected to system.
#1 Make sure it is primary or slave control in the motherboard.
#2 Check if there is a power or not on DVD Drive or it have then try to eject the layer.
#3 Acquiring the DVD Drive to see it that the JUMPER setting is Master, Slave, Cable Select.

Good luck!

LG GSA-T20N... | Answered on Aug 10, 2009


what are u installing!!!! on what!!!! what is jazz?

LG GSA-T20N... | Answered on Jul 15, 2009


Hi,

If you go to
start, control panel, Device manager, Disc drives, underneath is a tab, double click this,
open up the Dialog box, second tab is DVD region,
You can only change this a few time, like it says, once done a few times, you must replace the Disc drive, but it is possible a few times.
Hope this helps
Regards
Richard.

LG GSA-T20N... | Answered on Apr 27, 2009


  1. You connect the second monitor.
  2. Once loaded, open the start menu > power then hold shift while pressing the Restart option.
  3. It will say please wait. ...
  4. Choose Troubleshoot > Start-up Settings and press Restart.
  5. When your computer starts up you can choose option 3 which allows you to start the computer in low res video mode.

LG Computers &... | Answered on Jun 17, 2020


all I have is the cover for it. Hope it helps.
6_5_2020_3_56_49_pm.jpg

LG Computers &... | Answered on Jun 05, 2020

Not finding what you are looking for?
LG GSA-T20N DVD±RW Dual Layer Burner Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

k24674

Level 3 Expert

8091 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GSA LG

  • GSA LG

Most Popular Question

latest firmware hl dt st dvdram gsa t20n

  • Computers & Internet
Loading...