20 Most Recent
Leeson 1 hp 3450rpm 56 FR TEFC 115/230V Electric Motor 110142 - Page 7 Questions & Answers
How do I remove the blade from a Makita MK470 tile
There is not a lock on this saw. If the blade is to tight to hold by hand you need to use an impact wrench. It will loosen the nut before the blade has time to start spinning.
4/9/2021 7:30:42 PM •
Saws
•
Answered
on Apr 09, 2021
I was cutting a plywood and pulled the saw back through the cut, before the blade came to a complete stop. Now it will not turn on. Is there a reset switch or a failsafe that tripped when I did that?
Good afternoon Rebecca.
Some of the answer will depend on your make/model. Saws will generally have some failsafes inside to keep them from getting damaged, but lets start with what you have. You say you pulled the blade back through the cut before the blade came to a stop. That was probably OK - you generally don't want to stop the saw in the middle of material since it might pinch or jam against incoming wood.
If there is not motion, the foremost question is whether it's a saw problem or a power problem. To that end (please be careful here - unexpected saw starts can hurt you very badly)
- With the saw unplugged, can you move the blade at all? There may be a fair amount of resistance through the worm gear to the motor, but it should move. If it's totally jammed, you may want to try removing the blade and checking for debris jammed in the saw
- If the saw is plugged into another outlet that you know has power, will it turn on? If not, focus on the saw, if it works, focus first on the outlet.
- Is there power to the outlet? Plug something else that you know works into the outlet and see if it will turn on. If not... check if it's a GFI outlet and try resetting the breaker buton in the middle of the outlet. Then check the breaker panel that serves that plug and see if a breaker tripped. this could be particularly possible if it's a 15 amp circuit and you were, say, cutting a heavy thickness of plywood. Try re-setting the breaker then and see if the outlet turns back to life.
Some saws may have an overheat breaker, which will require you to just let the saw cool for a while. others may have a fuse, but the location will depend on the particulars of the model.
Hoping this helps.
Good Luck!
D
3/31/2021 10:32:05 PM •
Saws
•
Answered
on Mar 31, 2021
Where can i find florcraft tile saw parts for WTS950LM
The most reliable way is to contact the center where the saw was sold with a warranty period. Client will be able to choose a spare part among the original models. Professionals will offer a branded catalog that corresponds to the SN of the saw. The installation of the part will also take place there for an additional fee.
This method is not only the easiest, but also the most expensive. Therefore, owners are resorting to alternative methods. For example, original parts can be bought at a discounted price in the market. In the event of a breakdown, they are referred to a saw dealer who cannot refuse to carry out maintenance if the parts are factory-made. You can try this
https://writemypaper.nyc/
3/24/2021 12:17:42 PM •
Saws
•
Answered
on Mar 24, 2021
Not finding what you are looking for?