20 Most Recent
Kodak Easyshare G600 (1633379) Dock / Cradle - Page 2 Questions & Answers
How to add printing paper on kodak g600
Here's the manual for the G600.
http://www.kodak.com/global/en/service/publications/urg00536toc.jhtml
Loading paper is listed under "Getting Started". Remember to load the paper logo side down.
Hope this helps.
Ink cartridge is empty and I can not remove it to change it. It won't come out!
Press the power button to turn off the printer. Hold down the transfer and left arrow button at the same time. While holding them down at the same time turn on the power button. Let it go through the initialization process and once completed, the head should be in the up position. Open the cartridge door and push the cartridge to make sure it is latched and locked in place. Once the cartridge is latched, release the latch and the cartridge should release itself. Remove the cartridge from the printer.
Kodak Printer Dock Paper Tray
ok - hubby did the same thing -duh ! but here is the phone number to call and the part number you need to give them - just verify it hasnt changed.
1800 431 7278 part number 5f0478
I was mad at him :)
Easyshare G600 Dock
Robert,
I first tried shaking my daughter but that didn't work. The unit itself doesn't rattle at all and is otherwise undamaged. I will ask my local camera/ electronics repair shop to look at it. They repaired a video camera at a reasonable price when everyone else said it was uneconomic.
If too expensive, I will try taking it apart. I am wary of this because sometimes you take a screw out and something drops down inside but OK as a last resort.
Thank you for your help.
Ron
Kodak Easyshare Z740 turns off while trying to take pictures constantly
There are a few possible reasons why your Kodak Easyshare Z740 camera might be turning off while you are trying to take pictures:
- The battery might be low or dead. Try replacing the battery with a fully charged one to see if this fixes the issue.
- There might be a problem with the camera's power supply. Try cleaning the battery contacts and charging the battery to see if this fixes the issue.
- There might be a problem with the camera's firmware. Try updating the firmware to see if this fixes the issue.
- There might be a problem with the camera's hardware. If the camera is still under warranty, you should contact Kodak for service. If the camera is not under warranty, you may need to take it to a repair shop to have it fixed.
I hope this helps! Let me know if you have any other questions.
My kodak easyshare m883 camera turns on lets me change the time and date then cuts out
Hi,
please ensure that the battery isn't past it's expiration date- even if it's not been used before, an expiration m. And please ensure that the sd card does not have more data stored than was built for the camera to handle. If so, please transfer some data off of the sd card and then attempt to set the date on your camera again.
Thank you.
The screen and pictures are black even in light
Hi,
Please make sure that your camera doesn't have a black cover or tax over the lends. This would block any images from being stored whenever you attempt to take a picture. In other words, the camera wouldn't be able "to see". If you can't find any cover, please check that you've properly inserted an SD card for the camera to use and then switch modes (ie action, night time etc) until you see the area that you're attempting to capture come on the camera screen. Otherwise, you might need to get the camera checked at a store like BH Photo and video.
Thank you.
Not finding what you are looking for?