Wacom Bamboo (MTE450K1) Graphic Tablet - Answered Questions & Fixed issues

1-855-699-2266 The call center is currently experiencing very high demand. Please try again at 2:00 PM when it should be less busy. This is the only way to resolve the problem.

I guess it is sleeping if not in use, maybe to save power. If it goes offline, simply remove the USB connection and reinsert it. Therefore you might not need to reboot Mac.A new driver is a good idea, install it if possible.Take care!damnor01

When was it last working?
Well first, try restarting the Bamboo program or restarting your system. It has more than one program that runs at the same time. For example, one program may be the one to control the movements and another may be there to help manage your bamboo device.
Second, installing the bamboo drivers and software may help. Registry can be edited, but that can lead to more issues.
Goodluck! :)

the computer has not seen the tablet,so unplug tablet,switch computeron then off,then plug in tablet and switch on and computer should see it cables are okay

IT is Windows 7 that's it it is NOT made to work with it, more than likely you never will Win 7 doesn't play well with anything over 6 mths old.. and even then.. it sux.

try checking the usb cable. change it for a new one. i'm using a motorola cell-phone usb connection cable an it's working fine with my bamboo tablet. also, try to upgrade your drivers and change your usb port.

It's the windows 7 tablet feature that causes the problem. To solve it you have to disable it. Go to start -> search write "services.msc" (without the strokes) and hit enter. Now search for "Tablet PC Input Service" double click on it and when a little window pops up set Disabled under startup type list box. Now if you want to see effect immediately there is a button Stop, click on it, and wait until service is stopped. When done close both windows. This way you don't have to even restart your pc.

try recalibrating it. otherwise, you'll have to send it in for repair or replace it.

I saw another solution to this on another one. It suggests you take the pen nib out, wash it and leave it out of the pen for 24 hours.

the wacom site has them for 14.95

Is the pen clicking without you touching the tablet? (A few cm above?) Take out the tip, wash it and leave it out of the pen for 24hrs.

You can buy them new from places like Amazon or directly from Wacom. Just to confuse you more-- it used to be Bamboo, Intuos, and Cintiq. Now the entry level tablets are the Intuos, the mid-level has become the Intuos Pro, and then the Cintiq. http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=wacom+bamboo https://store.wacom.com/us/intuos-pen-touch/

Skipping usually implies a memory shortage and not necessarily a driver issue. The computer has to stop and start due to the memory filling up and having to transfer the data to the hard drive before loading more data. If you are sure that the drivers are correct it's probably a memory issue. You may be able to help by setting some programs that run in the background and use memory space not to load on start-up thereby freeing up memory for other programs like this particular piece of equipment.

I was given these solutions by Wacom, but still get the same problem or otherwise barely any response at all from the pen:

Regarding the information you provided, we would like to tell that if your Mac OS X's version is between 10.5 to 10.7.4, please proceed to step 1 to troubleshoot the problem. If your Mac OS X's version is 10.8, please upgrade the Mac to 10.8.1 then follow the steps below to start troubleshooting the problem.1. Reset the tablet driver.Click on Go > click on Applications > search and open the Bamboo folder > select Bamboo Utility > select All Users under Preferences > click on Remove button under Preferences.If the problem remains, go to the next step. If it is fixed, do not proceed with the rest of the troubleshooting steps.2. Set the driver to Pen Mode.Click on the Apple logo > select System Preference > click Bamboo icon > click Pen tab > on Tracking pane, select Pen Mode > close the Bamboo Preferences.3. Adjust the Double Click Distance and Tip Feel.Click on Start > click on All Programs > search and open the Bamboo folder > select Bamboo Preferences > click on the Pen tab > adjust the Double Click Distance to Big and the Tip Feel to Firm > close the Bamboo Preferences.

We hope these information have been useful in resolving your inquiry.Kindly contact us if you need more assistance.

When installing Zoom

Error 0

Error 0 can be caused by:

• Error encountered when upgrading from Version 0.9 or 1.0
• The source link of the Zoom installer package is broken
• An antivirus software like AVG that could have quarantined the files that were downloaded by the Zoom Installer

Solution

• Try uninstalling Zoom (from Programs and Features), then downloading the Zoom client installer (Download) manually and then install it (as Administrator)

what PC Is this,? what make and model This thing WACOM Tablet Digitizer UD-1212-R PC it's a 12x12 Tablet relics in the modern age good luck over 15 years old now 5th google it, am I lucky? https://amilcar.me/wacom-ud-1212-r-52/

I would uninstall the drivers, reboot, and let your OS install the mouse. Then try to re-install the new drivers that were released by Wacom yesterday available at the link I provided. (You probably got them there, I don't know) If it goes 'wonky' again, uninstall the new drivers and use the older ones provided on the website or just let you OS install if it will. https://www.wacom.com/en-sg/support/product-support/drivers

Follow the instructions from Wacom here: https://www.wacom.com/en-us/support?guideTitle=How-do-I-uninstall-and-re-install-the-Wacom-driver-on-Windows-for-a-Pen-Tablet%2C-Pen-Display%2C-or-Pen-Computer%3F&guideId=001-671, but instead of steps 2 and 3, use Revo uninstaller free version to remove the entire app package and drivers (https://www.revouninstaller.com/revo_uninstaller_free_download.html). Then restart the Wacom instructions at Step 4. Good luck!

Hello, There are usually error with the bamboo dock software. Are you installing that just a driver

This error can happen when you install the software from the CD provided. Go to Wacom's website and download the software from there and then install that.