It sounds like you are using the wrong mic for the radio or the mic has been wired incorrectly or the mic has become faulty or the radio has become faulty. Unplug the mic and see if the radio receives and works correctly. You should be using a Yaesu model MH-36b or a MH-42B microphone.
According to Specifications IT IS NOT BLUETOOTH compatible. Please see spec:
Specifications:
2000 Watts total system power
5.1 AV Receiver
500 Watts Sub
1500 Watts Stellite and center
10" Long Throw Active Driver
Digital Audio Video Input, Digital Output
Digital AM/FM LCD Display
2 Blue Power Watt Meters
Pure Piano Black Lacquer Finish
Plug and Play IPod, MP3, DVD, CD, HD-TV compatible
Bass, Treble, Full Function Remote Control
To obtain the passcode for pairing Bluetooth on your Pyle Hybrid Amplifier P2002ABTI, you will need to refer to the user manual or documentation that came with the amplifier. The passcode or PIN for Bluetooth pairing is typically specified in the manual, as it can vary depending on the manufacturer or model.
If you don't have access to the manual or cannot locate the passcode information, you can try some common default passcodes such as "0000" or "1234," as these are often used as default codes for Bluetooth devices. However, it's important to note that these default passcodes might not work for your specific amplifier model.
If none of the above options work, I recommend reaching out to Pyle's customer support directly. They should be able to provide you with the correct passcode or guide you through the pairing process for your Pyle Hybrid Amplifier P2002ABTI.
First off I have had one of these for almost a decade now...a very reliable item.
Most likely the Lithium Ion battery is shot. By removing all the screws in the deep holes on the back, and two tiny ones in the handle you can open the device up. The battery is soldered in but is easily removed with wire snips, On Amazon look for 18650 replacement battery and either solder to appropriate ends or get "18650 battery holder (what I did) you ll likely get a lot more years out of the device
It sounds like there may be a problem with your Walkie Talkie's display. The "E" and "O" symbols you are seeing could be error codes indicating an issue with the device's internal circuitry.
The "E 02" code could indicate a low battery or a problem with the device's power supply. The "O FF" code is less clear, but it could potentially be related to the device's frequency or channel settings.
If you're looking for a manual for the GME TX610, there are several ways you can obtain one. The GME TX610 is a handheld UHF CB radio that was manufactured by GME Electrophone, an Australian company that specializes in communication equipment.
One option is to visit the GME Electrophone website and navigate to the "Support" section. Here, you should be able to find user manuals for their products, including the GME TX610.
Another option is to reach out to GME Electrophone's customer support team and request a manual for the GME TX610. They may be able to provide you with a digital or physical copy of the manual.
If those options don't work, you can also search online for a digital copy of the manual. There are several websites that offer manuals for a wide range of products, including the GME TX610. However, be sure to download the manual from a reputable source to ensure that it's accurate and up-to-date. I cannot provide any website as it is legit, you have to search by yourself and ensure its validity.
By following these steps, you should be able to access a manual for the GME TX610 and learn how to use its features and functions effectively
It sounds like your headset is paired to your device, but is not being recognized as an audio playback device. Here are a few troubleshooting steps you can try:
Check the default audio playback device: Right-click on the speaker icon in the bottom right corner of your screen and select "Open Sound settings." Under "Output," make sure that your headset is selected as the default playback device. If it's not, click on it to select it and then click "Set as default."
Restart the Bluetooth services: Press Windows key + R on your keyboard, type "services.msc" in the Run dialog box and press Enter. Look for the Bluetooth services and restart them by right-clicking on each service and selecting "Restart."
Update the Bluetooth driver: Go to the manufacturer's website and download the latest Bluetooth driver for your device. Install the driver and restart your computer.
Reset the headset: Depending on the model of your headset, you may be able to reset it by holding down a button or a combination of buttons. Check the manual for instructions on how to reset your headset. Once the headset is reset, try pairing it again.
If none of these steps work, it's possible that there is an issue with the hardware of your headset. You may want to contact the manufacturer's customer support for further assistance or consider getting a new headset.
I can suggest some resources that you can use to find the frequencies you're looking for.
One option is to check the website of the Chippewa County Sheriff's Office or the local government website for information on radio frequencies used by their departments. Another option is to visit the website of the Federal Communications Commission (FCC) and use their online database to search for radio frequencies assigned to Chippewa County.
You can also try searching for online forums or groups of radio enthusiasts or scanner hobbyists that may have information on frequencies used in the Chippewa County area.
It's important to note that you may need a license or permission to use certain frequencies, and it's always a good idea to check local regulations and guidelines before using any radio equipment.