20 Most Recent Mad Catz PS3 Bluetooth® Headset Wireless Headset - Page 3 Questions & Answers

0answers
0helpful
1answer

Cannot connect my headset to

Hi,
check all the settings that you have on the PS3 make sure that you did not miss out anything that you had before from what you will be having right now, also try to reset you Headset if it is possible, maybe you need to try and have the setting reset on the headset as well since it was synced to your Old PS3 right.
Have a nice day.
7/27/2011 4:17:45 AM • Mad Catz PS3... • Answered on Jul 27, 2011
0helpful
1answer

Bought mad catz wireless usb

Hello,
It can be deduced from your problem that the bluetooth headset you purchased is mal-functioning as a result of the fact that it has a factory default,since you havn't even used it for once before the problem occured.
The only solution is to take it back to the point of purchase to get a replacement,because if you try to fix it now you'll void the warranty that came with it.

Thanks and have a nice day.
6/29/2011 10:36:35 PM • Mad Catz PS3... • Answered on Jun 29, 2011
0helpful
1answer

How do i connect the madcatz bluetooth to my ps3

Just pair it with your cell or pc and see the instructions on the screen it shows , allow all the serrvices
6/18/2011 8:48:12 PM • Mad Catz PS3... • Answered on Jun 18, 2011
0helpful
1answer

It won't charge

PC SUITE DOWNLOAD MODEL P83
5/18/2011 5:13:38 AM • Mad Catz PS3... • Answered on May 18, 2011
0helpful
1answer

I am unable to sync

Please see the sync details below:

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

4/29/2011 10:44:15 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

I cant find instructions to sync my Mad Catz PS3

Hope it helps:


Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

4/29/2011 10:43:23 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

I forgot my pass key

The pass key for the Bluetooth headset is 0000 (four zeros).

If you need further details do not hesitate to get back to me.

Hope it helps...
4/29/2011 10:31:18 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

Installing mad catz ps3 bluetooth

In order to use it you have to pair it with the PS3.

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

4/29/2011 10:22:29 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

The mad catz blue tooth

Try to charge it on a USB on the PC, If the red light doesn't stay on, meaning it's charging, then you have a faulty headset and you'll have to contact your retailer to ask for a replacement.
Unfortunately this is a know issue with this headsets...
Hope it helps
4/29/2011 10:21:36 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

I have a mad catz

You have to pair it with your PS3 or another device through BlueTooth.

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

4/29/2011 10:14:15 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

Okay i have the mad

If the headset you have is the Item No. 8860 in order to use it you have to pair it.
If you are using it on a PS3 then be sure that you have selected the headset in the PlayStation's settings.

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Troubleshooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***


Hope it helps

4/29/2011 10:13:10 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

So i bought the Mad

Hi Matthew,

With those headsets that think is a known issue.
If nothing happens when you hold down the answer button then the battery must be out (or the headset is faulty).
If you tried to plug it into a USB on a PC to charge it, and the red light does not stay on then I'm afraid it became faulty.
All you can do now is to get back to the retailer who sold it to you and get a replacement for it, or if the retailer cannot help you consider getting back to MadCatz requesting a replacement if it's still within warranty.

Hope it helps.
4/29/2011 10:08:19 AM • Mad Catz PS3... • Answered on Apr 29, 2011
0helpful
1answer

I need the pass key

Hi

It is "0000". Hope this helps...

Daniel

3/28/2011 6:58:49 PM • Mad Catz PS3... • Answered on Mar 28, 2011
0helpful
1answer

I lost the manual for

You will be able to download the manual at the link below.
Click here to download.
Download Adobe Reader to view, print and collaborate on PDF files.
3/25/2011 12:24:07 AM • Mad Catz PS3... • Answered on Mar 25, 2011
0helpful
3answers

Can't pair bluetooth

....My madcatz bluetooth will not charge everytime i plug it in the ps3 the red light comes on then it goes off and it keeps on doing it and its a brand new bluetooth...i hold it for a long time and it still wont work..HELP PLEASE!!!!!!1
3/16/2011 1:38:06 AM • Mad Catz PS3... • Answered on Mar 16, 2011
0helpful
1answer

My MadCatz PS3 Bluetooth is

On the PS3 try going to Settings -> Accessory Settings -> and see if you can turn up the voice volume. Another option is to have Voice Chat played through the TV instead of the headset.

Also check the settings of the game you are playing to make sure it is not turned down.

Hope this has been helpful!
3/6/2011 9:41:48 PM • Mad Catz PS3... • Answered on Mar 06, 2011
0helpful
1answer

I lost the number you enter to accessbluetooth

The usual default code for a bluetooth device is 4 zeros (0000). If that doesn't work, try 1234, which is the other, though somewhat uncommon, default. If your device tells you it needs more digits, just use 5 zeros or 12345.
3/6/2011 5:46:29 AM • Mad Catz PS3... • Answered on Mar 06, 2011
0helpful
1answer

Don't now the reg code

By default, it is usually 00000(four zeroes) or 12345.
Hope this worked for you?
3/5/2011 9:52:04 PM • Mad Catz PS3... • Answered on Mar 05, 2011
0helpful
1answer

When the headset is plugged

You need to keep holding down the power button after the red light turns off. Your lights will flash rapidly when you are in pairing mode.
3/5/2011 3:33:14 AM • Mad Catz PS3... • Answered on Mar 05, 2011
Not finding what you are looking for?
Mad Catz PS3 Bluetooth® Headset Wireless Headset Logo

211 questions posted

Ask a Question

Usually answered in minutes!

Top Mad Catz Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1667 Answers

Ekse

Level 3 Expert

13435 Answers

Brad Brown

Level 3 Expert

18805 Answers

Are you a Mad Catz Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mad Catz Radio Communications

  • Mad Catz Radio Communications

Most Popular Question

bought mad catz wireless usb

  • Radio Communications
Loading...