20 Most Recent Yale Y150/40/130/1 Combination PadLock with Questions & Answers


Lost Combinations or to rest the lock:
Go to this page..... Lost combinations FAQS by master lock http://www.masterlock.com/service-and-support/faqs/lost-combinations
24 7 Locksmith Orchard Park NY 716 710 7400 Locksmith Orchard Park NY

Yale... | Answered on Jul 29, 2016


It is very difficult and for this task you need to follow the manual guide given in locksmith san francisco or if you live there then can hire the locksmith professional as well.

Yale... | Answered on Nov 13, 2013


Yes, that never fixes the problem. This explains why, and why you can't diagnose television problems on an online forum. The television sections are really only for help with manuals and remote codes.

Here are similar questions that we see often.
Question:

I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ? Or

Turns on and sound works fine, but the picture is distorted (solarized? polarized? not sure what the term is) I replaced the main board, but that didn't fix it.
Or

I have an LG 55LM6200-UE with a dim lower-left. I just replaced both LED strips with no resolution. There is no physical obstruction visible, so this has to be a cable or board problem, right?

So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work as it should! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what it does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part you put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'NO Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous sellers use it as an excuse to get money for selling items that may, or may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $5 in parts and a couple of hours labour. It's not the fix you want to hear, but it is the best advice.

Andrew - Fixya Moderator

Locks &... | Answered on May 15, 2020


Open it up.
Remove the battery.
Leave it for 15 minutes.
Install a NEW battery, yours is nearly depleted.

The battery doesn't have enough power to take your programming demands..

I fixed all the errors in your written question :>)

Locks &... | Answered on May 13, 2020


WE HAVE NO IDEA IF OMEGA MAKES THEM OR NOT . AS ANY NON OWNER WOULD HAVE NO INTEREST IN FINDING OUT ASK THE MANUFACTURER'S TECH SUPPORT

Locks &... | Answered on Apr 21, 2020


https://www.youtube.com/watch?v=Q65rBwVvLDs

https://fccid.io/NUL450412ZWV/User-Manual/Users-Manual-3342158

Locks &... | Answered on Mar 06, 2020


I read this elsewhere. it's worth a try...
"I had the same problem, batteries dead and i could not find the keys. I read on the internet that if you get a hairdryer, and heat up the front of the safe where the keypad is and where the spare key goes in this will work, i thought anything is worth a try. So i held the hairdryer there for a bout 15 mins and what happens is the heat slowly boosts the battery life, enabling you to open the safe. You will notice that you start to get a beep noise from the key pad. even though i was getting a beep from the pad it didnt open straight away but after about 10 mins i retried the code and it worked. Make sure you replace the batteries immediately before closing the safe again "

Locks &... | Answered on Mar 02, 2020

Not finding what you are looking for?
Yale Y150/40/130/1 Combination PadLock with Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Yale Locks & Locksmithing Experts

john h

Level 3 Expert

23424 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

32926 Answers

Are you a Yale Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Yale Locks & Locksmithing

  • Yale Locks & Locksmithing

Most Popular Question

reset masterlock

  • Locks & Locksmithing
Loading...