20 Most Recent Jl Audio 300/4 Car Audio Amplifier - Page 9 Questions & Answers

Dealer with vin and proof of ownership

Manufacturers name may help as it could be an air conditioner, a CAT earth mover etc etc.

Input from radio left 3 terminals, -, L+, bottom screw R+ / Output to Right speakers on next 2 columns F+ R+ on top, F- R- on bottom / Output to Left speakers on next 2 columns F+ R+ on top, F- R- on bottom / last 2 wires Black 12 negative and Red 12 volt positive w/ 5 amp fuse inline.

There is nothing anywhere that says this unit has Bluetooth. https://www.google.com/search?q=NHDT+W58 This model number variation does and was fitted to 2007 - 2009 Toyota Corolla NHZT-W58 bluetooth ..

There are three ways to get the Radio Code. I wrote this Fixya Tip. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

# of Channels 4 RMS Power (Watts Per Channel) 50 x 4 @ 4 ohms

All about the codes and 3 ways to get it. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

first check all the power connections verify every thing is hooked up correctly. check the fuses. and the amp has to have a separate wire called remote going to the back of the head unit. the head unit sends a signal to the amp to tell it to turn on when the head unit is powered on.

Got some bad news for you https://www.justanswer.com/electronics/8xu1d-possible-change-language-kenwood-mdv-313.html

Question edited for clarity. If you can spell it, you can Google it :>D https://www.google.com/search?q=panasonic+omnivision+change+to+aux+mode

I have a remote from a Panasonic Omnivision TV vcr ...

JustAnswer https://www.justanswer.com > TV Problems Jan 27, 2010 - If you get TV power and volume to work in the AUX mode you could then do a Volume Lock for the AUX mode so that pressing Volume will be locked ... 1 answer · Top answer: Greetings, I'm assuming the TV will operate manually with the buttons on the front of the ... ....

if there is a Reset button at the front face of the Radio, or else full restart can only be done by removing the battery terminal. but make sure you still keeping the Code, may ask for Code if it is Code protected.

There are 3 ways to get a a radio code. I wrote the answer so many times, I wrote a Fixya Tip on it. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

I can't find anything on software or firmware downloads, but you could try resetting it. Check all of the settings categories first.https://www.google.com/search?q=panasonic+cn-273w+resetIt appears the model is only sold on the Japanese Market so there is not much on it looking from where I am in Canada.https://www.google.com/search?q=panasonic+cn-273w+manual..

Turn the radio on. Hold down the volume knob for 3 seconds. The display will come up Volume Setting Rotate the volume know clockwise until the display switches to time setting. Push the volume knob. Rotate the volume knob to select the hour Push the knob Rotate the volume knob to select the minute. Push the knob. Done.

Hi I have pioneer carozerria hzr990 and can't use usb

The vehicle has not been identified. The error message seems to appear on cd players when the tray refuses to eject. Lubrication of the ejection mechanism might help. Too little information has been provided to identify the specific model for any sort of disassembly. It is otherwise likely the player will have to be replaced.

It is saying WAIT 1 HR because the wrong code is being entered.

Leave it SWITCHED ON for an hour and it will reset itself

Make sure you have the correct code 

read below if you do not have the code
-----------------------------------------------------------------------------------------------

First make sure that the code has not been noted somewhere within the car (underneath the ash tray, glove box , rear of sun visor etc)
 
 
To see if your code is available here  for free then the radio will have to be removed from the dashboard (and if you are lucky, someone may have written the code on the casing ) .
 
If not then POST A BRAND  NEW  QUESTION
 
quoting the radio MAKE+MODEL plus ALL the LETTERS+NUMBERS on ANY LABELS ,BARCODES or STAMPED IN THE METAL CASING
 
Also quote the MAKE of CAR
 
note: Unfortunately not all radios can be decoded using the Serial Number
 
Otherwise try your Main Dealer ...........or take it into a Decode Service who will plug in a laptop to read/recode the memory chip (EEPROM). This takes a few minutes and shouldn`t be too expensive

BP937828363212

Try these website. It may help RADIO CODE UK ' Free Grundig WKC 5201 RDS radio code entry instructions and guides (radio-code.co.uk) GRUNDIG WKC 5201 RDS INFOMAT GR1001 / GR1001 Radio Code ' Online Service (carstereocode.com)