20 Most Recent Pelican PeliLock 1506 TSA-Accepted Combination Padlock - Page 6 Questions & Answers

ANY LOCKSMITH CAN PROBABLY OPEN IT FOR YOU

Heat it up. Put hot hands both sides for 10 minutes or slip it close to your skin or in your pocket for 5 minutes. Prepare for the shock! Or you can spray it with de-icer fluid.

contact the makers

The question leaves us wondering if you know the combination? Try 000 to see if it is still set to factory combination.

Your first step would be to contact the lock manufacturer, most will send you a replacement key with confirmation of your model and or Serial #.

Contact Omega directly to inquire.

Don't you have a over ride key? look on this link for what I mean. 2006 Competitive safes Cash Box Digital Lock Depository Safe...

no info generic answer either notify manufacturer or locksmith

notify steelcraft -your owners manual -or a locksmith

Home Depot contact information in link below: https://mans.io/item/defiant/g7x2d01aa

https://www.youtube.com/watch?v=Q65rBwVvLDs https://fccid.io/NUL450412ZWV/User-Manual/Users-Manual-3342158

I read this elsewhere. it's worth a try..."I had the same problem, batteries dead and i could not find the keys. I read on the internet that if you get a hairdryer, and heat up the front of the safe where the keypad is and where the spare key goes in this will work, i thought anything is worth a try. So i held the hairdryer there for a bout 15 mins and what happens is the heat slowly boosts the battery life, enabling you to open the safe. You will notice that you start to get a beep noise from the key pad. even though i was getting a beep from the pad it didnt open straight away but after about 10 mins i retried the code and it worked. Make sure you replace the batteries immediately before closing the safe again "

Here is a link to a Hunker web page describing in detail the setup you require. https://www.hunker.com/13419338/instructions-for-an-electronic-digital-safe

ask the maker, only they have a cure. (their design !) you posted with no maker of safe told nor model. impossible question. btw some have hidden key, but you lost that too..

Probably not! Sounds like something was damaged besides the plug. Clicking could be a tooth on the gear was damaged and now slips. The way I repair or determine what's wrong with locks is to take them off and start by manually operating the strike and then check / test the rest of the lock as I assemble it back to the door. If the gear is damaged, you should be able to see that once the lock is disassembled. Cross your fingers you find some debris in the lock and thats all....

talk to safewell https://www.safesworld.com/

Details, which safe is it?

hi : about the stockwell safe ex200----- 2535-EA

if the safe still has charged batteries you can deactivate any sceurity code by access through a small hole on the rear of the safe, if you can get to the rear area of the safe.. You need a long screwdriver to reach to the inside of the front of the door . Their is a reset button on the inside of the door in the lower right corner area( "B" button) on the end - not on the flat face surface of the door but on the vertical face( hing plate). You'll have to feel around and push the screwdriver sideways to push the button in.it will beep . YAHOO- YUH DID IT !!!. Then you can reset your own code.if you need further instructions call me . icq. 33819110 or [email protected]

Hi Debbie- I found this youtube video. https://www.youtube.com/watch?v=fjrTTlxWTIY Hope this helps.

there should be an access code maybe on the back of the device, if you have mounted it, remove it and inspect the back of it for code also check for code anywhere inside the the advertisement from package. if you bought it from a neighbor and it was opened, give it back,,,nice try