20 Most Recent US Night Vision USNV-PVS-14A Weapon Sight Questions & Answers

'THIS GUN'? The one that only you can see!

We are good but not clairvoyant :>D Give us a clue and remember condition is everything. For dating, I need make model, calibre and serial number

Optics | Answered on Sep 15, 2020

Don't "unscrew" the binoculars. there are no user servicable parts inside. the collimnation adj screws are beneath the rubber boot just under where your index fingers rest when looking through the bino's. use a jewelers screwdriver to tease the boot up and stick a small nut or something in. then put the binos on a stable surface and play with the screws a bit while watching the images. you can get them pretty close this way.

Optics | Answered on Sep 15, 2020

how would we guess . ask savage and include serial number

Optics | Answered on Sep 09, 2020

If you still need this, I have it saved as a series of nine (9) .JPG "scans".

Optics | Answered on Aug 27, 2020

Request from the manufacturer/distributor.

Optics | Answered on Aug 16, 2020

Contact Oggi to inquire.

Optics | Answered on Aug 13, 2020

Get a new air rifle with more power?

Optics | Answered on Aug 09, 2020

You have not stated the make of this telescope, but from your description, it appears you have an astronomical telescope (for star-gazing). These scopes generally omit the correction lens in the optical path that inverts the image for terrestrial use. This is because light-gathering power is more important than orientation - after all, there is no 'up or down' in space.

It may be possible to obtain an additional correction lens - check with the manufacturer or seller. If this was not pointed out when you made the purchase, you may be entitled to a refund. Otherwise, just enjoy the Heavens.

Optics | Answered on Jul 20, 2020

Hello, Tanvi -

1. Your question landed in the Fixya category for optics. "Optics" has to do with sight. I doubt that is the correct category for the question.

2. Please explain what "weavers" you are asking about and where (what country.) Are you referring the issue of suicides in the cloth weaving industry in India?

Note: Fixya.com receives questions from people worldwide. Those of us who volunteer to answer on Fixya are not mind readers and cannot guess what is meant by a question without more details.

3. You can add more information regarding your question by choosing Comment and typing added details.

Best wishes.

Optics | Answered on Jun 11, 2020

Check out Crosman site they have many parts an lots of parts fit older an new guns.

Optics | Answered on May 17, 2020

It may be the year 1967. Because I find greener gun number 79259 was made in 1967.

Optics | Answered on May 15, 2020

Trying to figure out how old my Whirlpool washer is Locate your machine's nameplate, which contains both the model and serial numbers. On top-loading Whirlpool washing machines, open the lid and look for the tag at the top rear of the tub. On front-loading washers, the tag is usually inside the door or near the bottom of the left or right side of the cabinet. If the tag is not in one of those places, pull the machine away from the wall and check the rear. Record the serial number with a pencil and paper or take a photograph. Be sure to record the serial number, not the model number. Decode the serial number at an online source like Appliance Cafe or Appliance 411 (links in Resources). Whirlpool serial numbers include a code in the second character for the year the product was built. Before 1990, the character was a number; from 1990 to 2010 the character was a letter. The number sequence started over in 2011.

Optics | Answered on May 13, 2020



Optics | Answered on Mar 13, 2020

I think I answer you question--when?? Take the good CCTV camera and hook it up to monitor. Then hook up the CCTV camera and turn it on. Point the working CCTV camera at the bad camera that is turn on. Now, look at the monitor which is working with your operational camera. Look at the bad camera while it on, and see how many IR LED's you can see on the bad CCTV, while it turn on. You should be able to the IR LED glowing red. If not, then there is a problem with bad CCTV IR LED's. Short wire, no power to the IR LED's. stewbison

Optics | Answered on Feb 20, 2020

Not finding what you are looking for?
US Night Vision USNV-PVS-14A Weapon Sight Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top US Night Vision Optics Experts


Level 3 Expert

85239 Answers

ray gallant

Level 3 Expert

69148 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33973 Answers

Are you an US Night Vision Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

US Night Vision Optics

  • US Night Vision Optics

Most Popular Question

no cam coder or digi cam but want

  • Optics