20 Most Recent Epson Stylus CX8300 Printer - Page 2 Questions & Answers

Not a switch off/on can solve but a resetting .So remove your printer from the PC and uninstall the printer software. Now reinstall the printer driver software and connect the Printer to be detected and installed. Check printer properties to see the ink levels.
Use head cleaning before a test is taken .

You can find complete instructions on what cartridges to order and how to install them at this link.

Go to www.epson.com/support and find the drifvers that work with your operatding system.

I think your printer head is block. If yes
#clean printer head by using hot water or alcohol.
and another regon is your printer ink cartrige / refill ink may be alternet. if yeas
#set the cartrige or ink properly.
Thank's

You can download all the drivers and software from here (Click here). Open the link and locate "Download Epson Stylus DX8450............" and click the link to download. There must be three Download Epson Stylus DX8450............... so, be sure to download all of them.

Good luck.

If you need further help, let me know with the name of the installed operating system on your computer.

Thanks for using FixYa.

Hello, and thanks for using FixYa.

did you mean on the printers screen?

have you done head cleaning ? after few clean, is there any ink on your print out? if still no print out.. make sure the ink cart tab is removed when you installed a new ink.. most of the time, when user removed the yellow tab, they fail to see the residual tape on the ink cart which is blocking the air path which is needed for the ink to flow into your print head..
some cases, check your printer purge unit.. see if the tube is not disconnected as if the tube came off..there won't be any pressure to clean your print head .. it's bit technical to fix it back..

Hi,

You can download the installation driver and softwares from manufacturer's site by clicking this link

• On the page which opens, select the operating system of your computer (Windows Xp/ Vista..) and download the drivers and software.

Hope this solves your problem. Thanks for using FixYa.

Here is a link to the website to download your driver. You'll need to make sure you download the correct driver for the operating system on your computer:
http://www.epson.com.ph/epson/drivers/driver_download.htm?dc=1&mode=3&m=false&catid=4&pid=1171

Hi

Thank you for your query

Please see link below for all drivers and related software for your printer

http://www.epson.com.sg/epson/drivers/driver_download.htm?dc=1&mode=3&m=false&catid=4&pid=1171

I hope this has been useful

can you open the unit. some printers allow access when you chsange cartridges. if so you will be better able to remove the jam. It is not recommended to just pull at it from the outside as you may damage the rollers, post back please

Put the ink cartridge onto a damp paper towel.
Does ink "bleed" onto the paper towel?
If not, then the print-heads are clogged,
and you should run the "head-cleaning" software (part of the software package for the Epson printer).

i get start the printer Epsom printer cx8300,cx8400 and viw the error wast ink bad bad no run how ripper that

That should have been set when the driver software was installed. Go to the control panel (if Windows) select the printer, then preferences. See if language preference is available.

Check the printer software maybe it is not properly installed