Top 20 Kodak EASYSHARE G610 Thermal Printer Questions & Answers

Probably a piece of the old one is obstring it.

Kodak EASYSHARE... | 61 views | 0 helpful votes

Consult the Kodak company or Go to a nearby gadget technicians. I hope it could help you....

Kodak EASYSHARE... | 234 views | 0 helpful votes

Are you using a thermal paper when printing? If you are, then this most probably a problem printer head problem.
hope this helps.

Kodak EASYSHARE... | 59 views | 0 helpful votes

printer doesnot print

Kodak EASYSHARE... | 139 views | 0 helpful votes

reinstall its drivers if it doesn't work then tell me i will tell you another solution thank you for your queston.

Kodak EASYSHARE... | 36 views | 0 helpful votes

Have you tried cleaning the print heads? The printer should have a function to do this...consult your manual would be my best guess

Kodak EASYSHARE... | 115 views | 0 helpful votes

the dock will not pick up paper lost my manual i tried one piece half full tray and afull tray it worked last time i printed what up
it keeps saing its out of paper

Kodak EASYSHARE... | 265 views | 0 helpful votes

ok! just make sure that you restart your printer and your computer to make sure that your drivers are recognizing your pc unit or laptop once thats done make sure that you do a test page on your printer and once that done make sure that the drivers work from your port on your printer try that and the hit me back..

Kodak EASYSHARE... | 44 views | 0 helpful votes

Dont worry on that you can download your software and drivers and also the firmware of your g610., Just visit this website Now you can just click download software and firmware. for you to see the link of the drivers and firmware

Kodak EASYSHARE... | 564 views | 0 helpful votes

Had same prob with G600, all i had to do to get it working again was to clean the rollers with a damp cloth to get it working again.

Kodak EASYSHARE... | 536 views | 6 helpful votes

-Try to Unplug power cable for 10secs
-Remove paper try from the printer
-Make sure you are using the extralife paper or the thermal paper that came from the cartridge
-before you put the paper tray on the printer clean first all the rollers of the printer using a clean cloth
-Now if your done put it back now the paper tray
-Plug the power cable back
-Then do a test print.

If these solutions did not solve the issue please call kodak toll free 1 800 235 6325 and have it repair. GudlucK

Kodak EASYSHARE... | 265 views | 0 helpful votes

A lot of times you need to do more than clean sensors to get results. You are getting yellow and pink because either soe colours (blue & black) are dried at the nuzzle or finished.

The procedure am giving you below will determine which is the case.

Ink may be new, but their nuzzles may be blocked; depending on manner of storage. To be sure apply a folded tissue paper to the ink nuzzle and press firmly. If the tissue comes off well blotted with ink it means you still have a good amount of ink in it the nuzzle is not blocked. If not blotted or scantily blotted, it means ink is really low or nuzzle is blocked. To be very sure of this, place nuzzle in a plate/saucer with a bit water so that the nuzzle is soaked. Leave for about 10 minutes. Then apply the tissue again. If still not well blotted it means ink is really low or empty. If new you should return it for a replacement. In the case of blocked nuzzles, the procedure may be repeated over to get results.

Kodak EASYSHARE... | 100 views | 0 helpful votes

Replace the colour cartridge,
or use Windows to configure your printer to print "black only".

Kodak EASYSHARE... | 68 views | 0 helpful votes

can you check if you have the CD that came along with the Kodak Printer? You would need that to install the printer on your computer. Once thats done, you should be able to print the pics
Hope this helps

Kodak EASYSHARE... | 195 views | 1 helpful votes

What a cam is it?

Most cams has pictbridge and you can connect them via an usb cable to the printer dock. Try it.

Kodak EASYSHARE... | 48 views | 0 helpful votes

look at the rollers and see if they have cracks
you may have to put a roller kit in

If you need further help, reach me via phone at

Kodak EASYSHARE... | 377 views | 2 helpful votes

It sounds funny but I have seen this so try it.Have you removed the protective strip on the contacts of the cartridge? the bare contacts must touch the printers.If I didn't see this happen I would not post it,it does.Many people in a rush to install make this mistake.Good Luck.

Kodak EASYSHARE... | 95 views | 0 helpful votes

***** Check for a paper jam***** if none then >>>>>>unplug the power cord, wait ten seconds plug back in,,,, hit the paper load button

Kodak EASYSHARE... | 154 views | 0 helpful votes

Not finding what you are looking for?
Kodak EASYSHARE G610 Thermal Printer Logo

Popular Tags

65 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6133 Answers


Level 3 Expert

2239 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EasyShare Kodak

  • EasyShare Kodak

Most Popular Question

printer will not pull photo paper

  • Office Equipment & Supplies