20 Most Recent Saniflo Saniplus Macerating Pump - Page 2 Questions & Answers

The sound you are hearing is the check valve.
Usually this valve is just above the pump.
It's nothing to be concerned about, it's a normal
noise, or it's the nature of the beast.

All my best to you.


Saniflo Plumbing | Answered on Nov 10, 2010

First possible cause which comes to mind is a failing motor bearing. Try lubricatng the bearing and see if the noise changes.

Second could be the impeller breaking apart.

Saniflo Plumbing | Answered on Mar 24, 2010

sounds like the pump is jamed with toilet paper or wipes.
You will have to take out the pump to un block it

Saniflo Plumbing | Answered on Aug 23, 2009

so acquire the instructions from moen and get it done right

Plumbing | Answered on Jan 13, 2021

Every 2-3 weeks, someone or something clogs it.

Plumbing | Answered on Jan 09, 2021

It most likely needs to be primed. Check the owner's manual for instructions.

Plumbing | Answered on Dec 28, 2020

When you next get the smell, check the traps to see if there is enough water in there to fill the trap, if one is less then it looks like water is getting sucked out when toilet is flushed or that trap (usually bath or shower) hasn't had water going in (lack of use) and water has partially evaporated.

Plumbing | Answered on Dec 22, 2020

yea the one you are about to spam us with

Plumbing | Answered on Dec 17, 2020

yes it can if you have hooked it up correctly and as to your additional info ?? and if trying to get more pressure is your cut in and cut iut or the pressure switch set correctly if not all the pumps in the world not going to give you more pressure and if well lines are plugging with debris the same problem

Plumbing | Answered on Dec 14, 2020

The handle and base of a kitchen fixture can work free after some time. A free fixture handle can meddle with the capacity of the spigot to turn on and off proficiently. Then again, a free base can move openly and cause the water lines providing the spigot to burst, causing a break. Fixing either of the two parts will incredibly diminish the aggravation related to a free kitchen spigot.

Eliminate any items in the sink bureau that meddle with your capacity to arrive at the two inventory valves situated at the rear of the bureau. Turn every valve clockwise to kill the stockpile of water to the fixture.

Inspect the fixture handle. You will either discover a setscrew with a recessed hex head at the handle base or beautiful covers snapped on the highest point of the handle or handles. You can also choose a residential plumbing Edmonton to solve your problem.

Plumbing | Answered on Dec 11, 2020

If the old hose isn't leaking, why change it. They discolour internally due to the type of water you have.
Chalky water makes white calcium deposits and soft water more brownish. Perfectly normal.

Plumbing | Answered on Dec 10, 2020

things happen even to the best diyer you either live with it or get it replaced by a professional sad to say

Plumbing | Answered on Dec 10, 2020

Sounds like your water supply lines under sink where they connect to faucet unit are loose oo they didn't apply plumbers putty under the faucet unit it self

Plumbing | Answered on Dec 10, 2020

Depends on the model, but if it is the 4 star shaped then just prise the centre cap off to reveal a screw head that if unscrewed will release the handle.

Plumbing | Answered on Dec 03, 2020

Not finding what you are looking for?
Saniflo Saniplus Macerating Pump Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Saniflo Plumbing Experts

Bill Johnson

Level 2 Expert

306 Answers

Vernon Taylor

Level 3 Expert

7427 Answers

Tom Chichester

Level 3 Expert

61127 Answers

Are you a Saniflo Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Saniflo Plumbing

  • Saniflo Plumbing

Most Popular Question

get lid over rubber older saniplus seal

  • Plumbing