20 Most Recent Dell PowerEdge 840 (becwmk1_2) Server - Page 3 Questions & Answers


Hello here is the homepage:

http://www.dell.com/support/drivers/us/en/04/Product/poweredge-r710

Yes, that will be okay.

But a SSD harddrive is much faster, than the old mecanical one.
I know they are a little more expensive, but you will see a speed improvement, you have newer seen before.

Good luck

Dell PowerEdge... | Answered on Jan 29, 2013


go here and enter the service tag of your server and download dell open manage server administrator managed node. once installed it will tell you exactly what the problem is. i believe the current version of OMSA is 7.1

Dell PowerEdge... | Answered on Jan 06, 2013


What color(s) is (are) the blinking light? Is the blink a simple on/off or is there a pattern to the blinks (long/short)? Do any other lights come on and blink? (These could be on the keyboard or the battery health indicator LED.)

If the light that is blinking amber or orange indicates that the system has failed the Power On Self-Test (POST). If the blinking light is white, the system is in sleep mode. Try disconnecting the power adapter. Take out the battery and remove all external peripherals. Press and hold the power button for 20-30 seconds to discharge the system's capacitors. Try to restart the machine with only the battery and AC adapter. Did the behavior change?

You can remove memory and the hard drive to check if those are causing a POST failure. Reinstall one memory stick at a time if you have a pair or more. If you can get to the Dell splash screen, try pressing F12 to launch the diagnostics. (You may have to press the key repeatedly starting from a cold boot.)

If the blinking light is alternating orange and white, then you could have a problem with the motherboard, battery or AC charging system. Since you believe that the battery and adapter are OK, then the problem would likely be the motherboard has been damaged. The damage could be at the connection for the charger or somewhere else.

I hope this helps.

Cindy Wells

Dell Computers &... | Answered 18 hours ago


SOME OF THEM WILL NEVER WORK IF THEY ARE OLDER MODELS

Dell Computers &... | Answered 19 hours ago


the answer would be the same as.
I dropped my PC to the concrete, , how many pieces did not break.
same answer (only GOD knows that).....
the answer can be :
1: yes, if lucky, if the motor spins and can hear it , does it?
2: no if motor silent. Impossible unless pay $1000's bucks recovery services (google that. "clean room HDD recovery services")
3: yes and no, some files can be recovered,
ever seen a record player turn table,?
Imagine deep scratches, killing one song or 3, or?>
but the other tracks still play on the phonoGraph.
same deal here. but tracks are called cylinders here.
but if the heads are dead, NO,
first:
what you do is listen the drive , if the motor inside, is dead, it' s a dead HDD.(RIP)
if not, then move the HDD to other PC as second drive.
and copy your files, that way.
if possible it will work. (luck happens, fate, entropy ,etc)

Dell Computers &... | Answered on Jul 10, 2020


To reset Windows 7 password with Spower Windows Password Reset, just follow the steps below:
Step 1: Download Spower Windows Password Reset Professional (trial version) and install it in an accessible windows. Spower Windows Password Reset Professional can be installed in windows 2000/xp/2003/vista/7/8/10/2008/2012/2016.
Step 2: Create a Windows password reset disk. You can use Spower Windows Password Reset to create a bootable CD/DVD or USB disk.
Step 3: Set the locked computer to boot from CD/DVD or USB drive.
Step 4: Boot the locked computer from Windows password reset disk.
Plug in Windows password reset disk to the locked computer, and restart it. Wait for a few seconds, Spower Windows Password reset program will start and ready for you.
Step 5: Reset forgotten Windows 7 password with Spower Windows password reset program.
When the Spower Windows password reset program is ready, do the steps below to reset windows 7 admin password:

Dell Computers &... | Answered on Jul 08, 2020


this is problem with overheating of motherboard. Please refer to the link. https://www.dell.com/community/Laptops-General-Read-Only/Error-code-M1004/td-p/3006198

Dell Computers &... | Answered on Jun 30, 2020


Start by pressing the menu button, select System, select Admin Menu, select Network, Select Wireless Setup, select your network from the list, then enter your network passphrase. Print a Settings Report to confirm the printer has successfully joined your wireless network.

Dell Computers &... | Answered on Jun 30, 2020


Press Ctrl-P while booting up
Management Engine will open
use 'admin' as the password
you are required to set up a new p/w, do it.
It will prompt and say if you do it will reset, that's what is required!
then exit,
once it restarts, the error message disappears!! now you can install OS as usual

Dell Computers &... | Answered on Jun 28, 2020


Larry Ng is our computer guru. His advice is priceless and encyclopedic. His answer should be down here, so the answer is searchable.

Larry writes

What PC what DELL PC is this, must I guess?
Google dead today, hint 1 you are not the first nor last.
2000-0334 , it you failed to type the whole error
not even told laptop or desktop or just what model PC, (vast exist)
1000-0334 or this?

a video card GPU error of some kind
reload the Dell card driver from dell.com
?
or is the iGPU failing, in the CPU.
for same reason bad drivers.

if you installed W10 and dell.com told you not to do that , bingo, for no w10 drivers at dell for 10 year old PC or older, , NO PC told no OS told so there is no CLEAR answer,. ALL I can do is beg and pump,, endless

Dell Computers &... | Answered on Jun 20, 2020


You will get advice on how to format the hard drive and start again but there is no solution to lost passwords for security reasons.

Dell Computers &... | Answered on Jun 20, 2020


You can use Kernel for Outlook PST Repair Tool to repair your damaged Outlook pst file successfully. Go to http://www.pstfix.com
to download the tool and refer to http://www.pst.msoutlookrepair.com
to know more about the pst recovery.
9_11_2014_11_13_48_am.gif

Dell Computers &... | Answered on Jun 18, 2020

Not finding what you are looking for?
Dell PowerEdge 840 (becwmk1_2) Server Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Ekse

Level 3 Expert

13434 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PowerEdge Dell

  • PowerEdge Dell

Most Popular Question

new toshiba sas drive will not setup in

  • Computers & Internet
Loading...