20 Most Recent LG SGBS0001606 Bluetooth HBS-200 Stereo Headset Transceiver Questions & Answers

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF,
then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999



User Manual
You can obtain a copy of your user manual by locating the FCCID on the label directly on the device,
then then going to the FCC Website - https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
Be sure to put the first three characters in the first box and the rest (including hyphens) in the second box.

They are not "paired" yet. Look for instruction on how to pair the devices. Also make sure batteries in both are good. Range is greatly reduced (to inches) with bad batteries.

I have the same problem with my HBS-250. It was working fine on my iPod Touch. It worked the first couple of weeks on my iPhone 4 then stopped playing music. Phone funtion works. No music or podcasts or streaming from the web

Es ist nicht, dass es nicht in Vista arbeiten, aber ist ein bekanntes Problem. Der Bluetooth-Stack ist von der Audio-Stack und sie nicht zu vermischen, wie zu trennen.

Allerdings müssen Sie an den Hersteller wenden, und überprüfen sie, ob sie mit einem verfügbaren Fahrer haben. Ich habe überall gesucht, aber nicht post LG einen Treiber für das LG 200 Kopfhörer.

Wenn der Hersteller könnten Sie den Treiber herunter und installieren Sie die Treiber des Herstellers. Sobald dies geschehen ist sollte es zeigen, wie eine neue Audio-Ausgabegerät.

Vielen Dank und viel Glück!

You can obtain a copy of your user manual by locating the FCCID on the label directly on the device, then then going to the FCC Website - https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
Be sure to put the first three characters in the first box and the rest (including hyphens) in the second box.

If all the pairing instructions are being followed and the connection still can't be made Its usually compatibility issues that's the problem.

As this is a Bluetooth version 1.2 device if you are attempting to pair it with a newer 2.x compatible device it may not work properly even though backward compatibility is supposed to be a given.

In that case the best answer is to purchase a newer Bluetooth 2.x compatible headset to work with your Bluetooth 2.x enabled device.

0000

hello If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

If the LG Tone Infinim HBS900 is not pairing with your Apple iPad, there are a few things you can try to troubleshoot the issue:

1. Check the Bluetooth settings: Make sure that Bluetooth is turned on and that the LG Tone Infinim HBS900 is in pairing mode. To put the device in pairing mode, press and hold the power button until the LED light flashes blue and red.
2. Check for software updates: Make sure that your iPad has the latest software updates installed.
3. Check for other connected devices: Make sure that the LG Tone Infinim HBS900 is not already connected to another device. If it is, disconnect it from that device before trying to connect it to the iPad.
4. Check the distance: Make sure that the LG Tone Infinim HBS900 and the iPad are within close proximity to each other. Bluetooth devices typically have a range of around 30 feet.
5. Reset the LG Tone Infinim HBS900: Hold down the power button for 10 seconds, release, and then hold it down again for another 10 seconds.
6. Reset the iPad's network settings: Go to Settings > General > Reset > Reset Network Settings.
7. Check if the device is in pairing mode, if not activate it.

If none of the above steps resolve the issue, you may need to contact the manufacturer or a professional technician for further assistance. It's recommended to check the user manual of your device before trying any of the above steps, as the process of troubleshooting the pairing process can vary depending on the model and manufacturer.

resolder one in

have you replaced battery? 1. charger is not working 2. battery is bad.

You can't use bluetooth headphones,

Believe this or not, I had the same problem. The fix... Cleaned out the ear wax from the hole that got packed in there on my first use. No kidding. Hope that solves our situation.

if check both voltage and current rating both are same no problem can connect

Take off the rubber earpieces and look down the holes to the speakers. Can't see the speakers? That is because there is a black sticker covering the hole. The sticker is actually a very fine mesh that is supposed to let sound through. But it gets clogged with earwax and other crud, which interferes with the sound. The mesh is probably supposed to protect the speakers, but what is the point if it kills the sound? I removed the mesh and my LG Tone+ sounds like new again. Maybe it will die a quick ***** from sweat and stuff, but I was going to throw mine away anyway, so even if it's living on borrowed time, I'm happy.

sould't be doing this

You need to replace the battery in the headset.

i had to find the stereos max address download a bluetooth direct app and use it and musicflow bluetooth simultaneously on moto z3 hope this helps