Questions & Answers
When I insert sandisk cruzer
Since it works with other systems there is a system incompatibility issue. Are you using the same OS in this machine as in the others where it works? Could it be that?
Using XP? It has some issues with some usb devices.
Can't format a flash (thumb USB) Drive on my
Download Partition Wizard for mac bootable version and burn it to a dvd. Now, put the dvd in and turn off the computer, now put the usb drive in. Start the computer and boot from dvd drive Partition Wizard will boot up, left click on the usb drive and of the left side click format, now up top left click apply. Wait until it's done, now your usb drive is blank.
How to transfer computer pics to flash drive
Quite easy to transfer computer pics to flash drive via Windows Explorer:
1. Plug USB flash drive and iPhone to computer. iPhone will receive a prompt to approve it. Approve it and iPhone will be automatically detected by computer.
2. Open Windows Explorer and head to "iPhone > Internal Storage > DCIM". A list of photos on iPhone will show up.
3. Hold "Ctrl" and select photos you would like to transfer to USB stick and press "Ctrl + C".
4. Create a new folder in USB drive or find a folder, then press "Ctrl + V" to transfer iPhone photos to USB flash drive.
If you're prone to find more effective ways to transfer computer pics to flash drive, just check out this tutorial:
Remove write protection
This could be a Windows Registry setting that disables you from writing to your flash drive (or formatting it). If you are running Windows after Win XP SP2, you can change that setting.
the write protection:
1.From the Start menu, click "Run", type "regedit", and press <Enter> or click <OK>.
2.Navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > StorageDevicePolicies.
3.Double click on "WriteProtect" and change the value to 0 (WriteProtect = 0 for disabled; 1 for enabled).
4.Close the registry editor and restart Windows.
5.After Windows starts, test writing to your USB drive.
Serious problems might occur if you modify the Windows registry incorrectly. **PLEASE** make sure that you follow these steps *exactly* and *carefully*. For added protection, back up the registry before you modify it in case you have trouble so it can be restored.
For more information about how to back up and restore the registry, follow the steps as in the KB Article: http://support.microsoft.com/kb/322756/
Not working with dvd player
Some DVD players are more capable than others of reading "other" types of media. Upgrade to a newer DVD-player.
What software are you using to attempt formatting? You should be using the special software available from the card maker.
On q macbook air sandisk was seen, now it flashing
Click Start, then type device manager in the Search box, then click Device Manager.
Expand Universal Serial Bus controllers. Right click a device and click Uninstall. Repeat for each device.
Once complete, restart your computer. Your USB controllers will automatically install.
SOLUTION 1 - Unlock the memory card. There is a Lock switch on the left side of the SD card. Make sure the Lock switch is slid up (unlock position). You will not be able to modify or delete the contents on the memory card if it is locked. NOTE: If you are using a microSD/microSDHC card or a miniSD/miniSDHC card, insert the card into the microSD/miniSD adapter. The SD adapters will also have a lock switch. SOLUTION 2 - Toggle the lock switch. If the lock switch is loose and moves easily It is likely the switch is sliding to the locked position as the card is placed in your host device. In this case the card will need to be replaced. SOLUTION 3 - Try to Format the card using Disk Manager (For all memory cards) The data on the memory card may be corrupted. Format the card under Disk Management and then try to transfer files to the device once more.
8GB micro sd card formated for 34MB how will i format for 8GB
Step 1: Click start click to open on my computer you should see your usb drive F: right click select properties there will be an array of options select the sharing tab option then advanced sharing permissions make sure you have a tick in the share this folder box then click permissions make sure all three boxes are ticked you full control change and read in windows 7 Click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP also If you are running a Windows XP OS then you might be able to: Click start right click on my computer select open Right click the icon of your Flash Drive (It should be F: / E: or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. you might have restore it to its defaults Right click on usb drive select properties you will have an array of options Select the hardware option then select your drive properties policies restore defaults In XP Right click on your drive select properties then on customize restore Default in W 7 Click start click on my computer you should see your USB Drive right click then select format another way is to control panel administrative tools computer management disk management right click on your USB Drive select format
Can I unformat a Cruzer 4gb drive?
You can right click your USB device from the My Computer window, and you should be able to re-format it to a NTFS file type...If that does not work you will have to download another Free USB Formatter like http://www.pendrivelinux.com/tag/format-tool/Very useful for projects more in depth...That may work for you
Not finding what you are looking for?