20 Most Recent
Questions & Answers
Hawking Extender- Connected to WiFi but cannot access Internet
First think I always do is Reset Linksys Router and disconnect extender. Then turn off all security on router. Do soft reset on ipod. leave extender off and see if you can connect to the linksys. If you can then plug in extender (still with security off) then see if ipod connects to extender.
you might have to soft reset ipod again once you connect the extender.
if that works. reset security. Let me know how that goes.
on Aug 08, 2015
My Hawking 801 is 2 years old. It has started
First thing you need to do is setup the IP, Subnet Mask, and Gateway of
Before any connection of the extender, we have to find out the IP of the router.
Run Type "cmd", hit enter
In the black command prompt window, type "ipconfig"
The ###.###.###.### to the right of default gateway is the IP of your router.
Now you can either connect the extender directly to your computer or
to the router.
Use the wizard to find the extender and to change the information of your
For example based upon the above #...
IP: 192.168.1.*** (Subnet: 255.255.255.0
Gateway: 192.168.1.1 (
The *** can be any # up to 250 except for the routers...typically we use 235.
After the wizard saves and reboots the print server, connect it back to the
router or leave it there.
Then open up your Internet Explorer and in the address bar, put in the
Address of the router in (192.168.1.235).
It should come up and ask your for the username/password (admin/1234) if it
doesn't then power cycle the device.
On the main page of the extender, fill in exactly the wireless
settings of your router here.
Make sure you fill in...
After you save, you should be able to disconnect the extender via lan cable
from the router and use it wirelessly.
link is here
on Oct 09, 2011
WAP connecting to another WAP
On the D-Link WAN page, change IP Address to static and give it an address about 30 away from both the Hawking and the Linksys. On the DHCP page, disable DHCP.
In a multiple router network such as yours, you can only have ONE real router. The others have to be disabled as routers. Disable thier DHCP and give them static addresses that are all at leat 10? or more from each other. Wireless should all be the same setup. The on;y exception is the SSID which can be slightly different to know which wireless you are on.
on May 31, 2009
Setting up w/ Netgear router
I've had the worst of luck with Hawking ANYTHING. I suggest taking it back. Sorry, but my experience with this product is such that if you get it working, it will break again within 24 hours.
on Dec 13, 2008
I would like to know how to set up HAWKING HWDN3 USB 2.0 Wireless 300N Dish Network Adapter for Windows 10?
Have you logged into your router from a computer? Is it designed for win10 or a previous version of windows? Sounds like its for a previous version id try rolling back the driver and or using compatibility mode for what ever version of windows it was designed for. Select the app, right click and there and or in properties is compatibility mode. Ps is it your router that you updated? You'll need to log into it with a computer and RJ45 network cable. The usual network cable. And do the initial configuration like setting bssid and password Wi-Fi ect.
on Mar 17, 2019
Installing a hawking HOW2R1 Repeater and setup
The Setup Wizard will now prompt you to automatically
configure your IP settings (recommended) and enter a
security key if the network you are connecting to is an
encrypted network. Enter the key and click Continue.
If you do not know the security key of the network you are connecting to, consult your network administrator.
on Jun 10, 2014
Not finding what you are looking for?