20 Most Recent Insignia 42" Flat-Panel Plasma HDTV Questions & Answers

0helpful
5answers

The store demo mode is

Are you using an HDMI cable? Go to input and select TV. Then you should be able to access the Plug & Play option and be able to turn off the Demo Mode.
1/12/2022 6:43:12 AM • Insignia 42"... • Answered on Jan 12, 2022
0helpful
1answer

Why does my TV turn on then off when i turn it on either by the remote control or the power button on the TV?

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
9/29/2016 3:43:49 PM • Insignia 42"... • Answered on Sep 29, 2016
0helpful
1answer

I have an Insignia 42" LED low HD like 400 something, just wanting to get the screen repaired and wondering the cost it would be at, two massive lines like strips are hanging down the LED.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD screen are similar, irrespective of its brand and screen size.
3/17/2016 7:24:40 AM • Insignia 42"... • Answered on Mar 17, 2016
0helpful
1answer

Insignia ns 42p 650 code number to access settings something like8-5-1- power

You're asking about how to enter its service mode; I assume. If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important. Type in the brand name and type of your device, in the search box [at the top right] of the home page; to get the related posts easily.
7/4/2015 6:06:08 AM • Insignia 42"... • Answered on Jul 04, 2015
0helpful
3answers

Screen is scratched up

I'm sorry man. Be more careful.
2/27/2015 10:57:11 PM • Insignia 42"... • Answered on Feb 27, 2015
0helpful
1answer

Why does red power stay on ?

Check and replace the damaged component/s at its main board. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
8/6/2014 5:09:59 AM • Insignia 42"... • Answered on Aug 06, 2014
0helpful
1answer

Insignia troubleshooting

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
8/6/2014 5:09:23 AM • Insignia 42"... • Answered on Aug 06, 2014
0helpful
1answer

Electronic tech needs help this tv only half of picture is showing what could be the problem i wants to fix it myself

Hello Danyell, According to the model number you provided you have a 42" Insignia plasma TV. The problem you reported with having just a blank black screen on the lower half is due to a bad lower buffer board or also called a lower scan board. The part number is LJ92-01739C and if you Google this part number you can find these online and also find some sites that may show a short video on how to replace it. Price of this board looks to be about $35. Also of note is you will find that this part number is a Samsung part number which means your Insignia TV has a Samsung plasma panel in it so the associated circuit boards will also be Samsung parts.
5/2/2014 10:44:32 AM • Insignia 42"... • Answered on May 02, 2014
0helpful
1answer

Buttons on TV suddenly not responsive

If they are actual buttons check to see if one is stuck. Listen for a click on each button while it is turned off so you can hear it and feel it. Another possibility could be when you moved it around somehow the internal cable that connects the buttons to a connector has slipped out or just has a bad connection. Would require you to take the bezel off to see if the internal connections are ok. Not sure what else to suggest. At least the remote works.
2/11/2014 3:10:10 PM • Insignia 42"... • Answered on Feb 11, 2014
0helpful
1answer

Insignia 42 plasma turns on black screen audio good

Check and replace its back-light inverter board. There is no back-light now. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/
2/4/2014 3:22:09 PM • Insignia 42"... • Answered on Feb 04, 2014
0helpful
1answer

The score on Fox and CBS IS HALFWAY OFF THE

I have a plasm insignia 42p650a11 my screen is crack where can i get a screen at for my tv..
1/26/2014 4:10:19 PM • Insignia 42"... • Answered on Jan 26, 2014
0helpful
1answer

No signal hdmi

Get in to its service mode option, and check whether HDMI ports are enabled or not. If you do not know more, contact any service technician. If you wish to get more details about how to enter service mode to this TV, check this site, and surf the posts there. Pull up older posts. http://electronicshelponline.blogspot.com/ Surf the site with patience.
5/29/2013 12:53:32 PM • Insignia 42"... • Answered on May 29, 2013
0helpful
1answer

NO PICTURE NO SOUND POWER LIGHT IS ON

Visit the site named 'Electro-help' for more details. Click this link. View it in "Timeslide" or "Flipcard" option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. You can also click the [Home] tab to see the latest updates. It will make search easy. There are more than 1350 posts to different brand TVs now. Pull up older posts there or do a search by type in the Brand Name of your device in the Search Box, at the top right of the display window.

12/5/2012 4:57:32 PM • Insignia 42"... • Answered on Dec 05, 2012
0helpful
1answer

Insignia NS-42p650a11 picture but no sound

Visit the site named 'Electro-help' for more details. Click this link. View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. It will make search easy. Some times, the ads attached with each posts, both at the right and bottom, might help you to find the availability of spare parts. There are more than 850 posts to different brand TVs now.

9/27/2012 4:04:00 PM • Insignia 42"... • Answered on Sep 27, 2012
Not finding what you are looking for?
Insignia 42" Flat-Panel Plasma HDTV Logo

89 questions posted

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Cindy Wells

Level 3 Expert

6587 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Insignia Televison & Video

  • Insignia Televison & Video

Most Popular Question

store demo mode

  • Televison & Video
Loading...