20 Most Recent SanDisk 4GB microSD High Capacity Memory Card - Page 3 Questions & Answers




http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html

Support IDE/SATA/USB Hard Drives memory cards USB Memory Drives

Windows Password Cleaner
Available in Live CD to run offline
This is a utility to blank the password of any user that has a valid local account on your Windows system.
You do not need to know the old password to blank the password.

hope this helps

SanDisk 4GB... | Answered on Jul 21, 2012


you will need to connect your camera to your computer
if you can see your sd memory on your computer

click start control panel administrative tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes


automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start

you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive

I found that you get best results by ticking one box then returning after it has finished then tick the other box

hope this helps

SanDisk 4GB... | Answered on Jul 21, 2012


C:\Users\Bob\Downloads> copy Update.iso F:\
will take you here
Why is the second file copy failing?
The hint is the file extension: *.iso, which suggests that this is a CD or DVD image, and DVD images have the feature that they tend to be really big.
Like more than 4GB big.
USB thumb drives tend to be formatted with the FAT32 file system rather than with NTFS. And FAT32 has a maximum file size of 4GB minus one byte.
The user confirmed that the Update.iso file was larger than 4GB and that the USB thumb drive was formatted as FAT32.
Mind you, the error message doesn't help at all in identifying that this is what's going on. I don't know where it's coming from, but my guess is that somewhere inside the copy command, it tries to create the destination file and set its file size. Since the file size is out of range for FAT32, the call fails with the error ERROR_INVALID_PARAMETER, and that's what ends up bubbling out to the user.
But at least now you know what the confusing error message is trying to tell you.

hope this helps

SanDisk 4GB... | Answered on Jul 20, 2012




http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html

Support IDE/SATA/USB Hard Drives memory cards USB Memory Drives

Windows Password Cleaner
Available in Live CD to run offline
This is a utility to blank the password of any user that has a valid local account on your Windows system.
You do not need to know the old password to blank the password.

hope this helps


SanDisk 4GB... | Answered on Jul 20, 2012


click start control panel administrative tools computer management disk management right click on your sd drive select properties click tools you should see click check now click start two boxes

automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start

you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive

I found that you get best results by ticking one box then returning after it has finished then tick the other box


hope this helps

SanDisk 4GB... | Answered on Jul 05, 2012


You have to be the computers administrator to change any values on any hard drive on your computer


click start control panel user accounts on the users tab click the name of the computer administrator you must have full control


click start click to open on my computer you should see your sd card drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box


then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7


click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select open
Right click the icon of your sd drive (It should be E:/ or something)
Click Properties in the menu that comes up
Click the Sharing tab
Click permissions
And finally, click Allow next to Full Control.

SanDisk 4GB... | Answered on Jun 24, 2012


What phone model?
It may not supportt 4GB (micro SDHC).

If it does, then "format" the card in the phone or in a computer.

SanDisk 4GB... | Answered on Jun 23, 2012


click start click on my computer you should see your sd drive
right click then select format

another way is to control panel administrative tools computer management disk management right click on your sd drive select format

hope this helps

SanDisk 4GB... | Answered on May 29, 2012


You have to be the computers administrator to change any values on any hard drive on your computer


click start control panel user accounts on the users tab click the name of the computer administrator you must have full control


click start click to open on my computer you should see your 4gb micro drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box


then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7


click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select open
Right click the icon of your 4gb micro drive (It should be E:/ or something)
Click Properties in the menu that comes up
Click the Sharing tab
Click permissions
And finally, click Allow next to Full Control.


if you need more help with this post a reply

hope it helps

SanDisk 4GB... | Answered on May 14, 2012


click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers


if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem


check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts


if its not working on your mobile it might be faulty


hope this helps you

SanDisk 4GB... | Answered on Apr 18, 2012


click start click to open on my computer you should see your usb drive E: right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7


click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select open
Right click the icon of your usb drive (It should be E:/ or something)
Click Properties in the menu that comes up
Click the Sharing tab
Click permissions
And finally, click Allow next to Full Control.


if you need more help with this post a reply

hope it helps

SanDisk 4GB... | Answered on Apr 15, 2012


I would try to reformat the sd card first and if the problem continues go exchange it.

SanDisk 4GB... | Answered on Apr 10, 2012


click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers


if you can see your usb drive but its not working

ports (com&lpt) right click update driver

it might be listed as a mass storage device wih a yellow or red icon on it
if this fails to fix the problem

check the USB leads that attach to the motherboard
usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts


click start all programs accessories open windows explorer navigate to your micro card photos


right click on the photo's select copy navigate back to the usb drive right click select paste or select the top photo hold the mouse cursor then select the bottom photo then drag the photos to your usb drive then drop them


or if you are downloading photos from the internet
once it starts downloading windows will ask whether you want to run or save it


a browse option will open you can save it into a folder in my documents or another device or a usb device

if you need more help with this post a reply

hope it helps you


SanDisk 4GB... | Answered on Mar 29, 2012


click start click to open on my computer you should see your usb memory card E: right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select open
Right click the icon of your usb memory card (It should be E:/ or something)
Click Properties in the menu that comes up
Click the Sharing tab
Click permissions
And finally, click Allow next to Full Control.



hope this helps you

SanDisk 4GB... | Answered on Mar 29, 2012


A few important bits of information about using faults and possible fixes on usb drives and memory cards


click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem
check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

click start control panel administrive tools computer management disk management right click on your drive select properties click tools you should see

click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start or you might tick one box then return after its finished the first repair then return and tick the second box

(I have found better results ticking the first box then reurn and tick the second box) you should not do anything while the chkdsk utility is in progress any input may damage this drive

also you might need to do this


click start click to open on my computer you should see your usb drive F: right click select properties there will be an array of options select the sharing tab option then advanced sharing

permissions make sure you have a tick in the share this folder box then click permissions make sure all three boxes are ticked you full control change and read in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP
also
If you are running a Windows XP OS then you might be able to:
click start right click on my computer select open
Right click the icon of your Flash Drive (It should be F: / E: or something)
Click Properties in the menu that comes up
Click the Sharing tab
Click permissions
And finally, click Allow next to Full Control.


if you need more help with this post a reply
hope this helps you

SanDisk 4GB... | Answered on Mar 25, 2012



click start control panel administration tools computer management disk management right click on your usb drive select properties click tools you should see click check now click start two boxes

automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start or you might tick one box then return after its finished the first
then return and tick the second box
you should not do anything while the chkdsk utility is in progress any input may damage this drive

click start click on computer then right click on your usb drive select format
hope this helps you

SanDisk 4GB... | Answered on Mar 20, 2012


You format it, use FAT32 if you need best compatibility with other devices or NTFS if you use it on pc or very new devices.

SanDisk 4GB... | Answered on Jan 29, 2012

Not finding what you are looking for?
SanDisk 4GB microSD High Capacity Memory Card Logo

Popular Tags

201 questions posted

Ask a Question

Usually answered in minutes!

Top SanDisk Electronics - Others Experts

k24674

Level 3 Expert

8091 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

ChinthakaJ
ChinthakaJ

Level 3 Expert

943 Answers

Are you a SanDisk Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SanDisk Electronics - Others

  • SanDisk Electronics - Others

Most Popular Question

4gb micro sd card showing its capacity

  • Electronics - Others
Loading...